PDA

View Full Version : turbo oil feed



degm/williams
24-11-2006, 01:24
does any one know where you get the oil feed from for the turbo and where the return goes also if there is a high pressure oil pump normally used thanks

BenR
24-11-2006, 02:48
T off and take a feed from the pressure warning sender, and return to the TDC dowel hole at the base of the block front near the flywheel.

kj16v
24-11-2006, 08:45
Can you point out the TDC dowel hole on this pic?

tony16v
24-11-2006, 10:16
its on the back of the block.

tony16v
24-11-2006, 10:22
heres a pic of mine..

http://www.rtoc.org/library/fileroot/RKNQKPTRPSXBEYKIDXJC.jpg

degm/williams
24-11-2006, 20:07
is this sensor the one at the front or the one at the back

BenR
24-11-2006, 20:36
Both on the front.

http://i13.photobucket.com/albums/a300/BenRAWT/willycon042_196.jpg

kj16v
24-11-2006, 20:45
-edited-
What I just posted here is now irrelevant.

degm/williams
24-11-2006, 23:47
thanks