PDA

View Full Version : Williams ride height on the rear?



Winston
09-02-2005, 23:27
Please could someone measure from the centre of the wheel to the arch for me.

Just need to know how much higher mine is stripped out.

Cheers
winston

Winston
10-02-2005, 01:59
Front as well if you can :D

northys is 300mm, anyones different?

KingStromba
10-02-2005, 09:37
Ill check tonight

2 live
10-02-2005, 10:13
northys is lowered tho :wink:

northy
10-02-2005, 11:30
not at the front its not.

Not too sure on the rear now...was parked against another 3 one owner from new and that was the same height as mine.

J o n
10-02-2005, 12:29
another fellor modder then Northy! personally it's gotta be standard all the way for me ;) lol

2 live
10-02-2005, 14:21
and me lol.....well ride height anyway lol

J o n
10-02-2005, 15:49
and me lol.....well ride height anyway lol

your not into this chaved up lowering of the rear either then Jon? ;)

lol

Winston
10-02-2005, 16:01
Chaved up :shock: lol

Go kart stylee...Its so high on the back at the moment..hopeing to have it a similar ride height to Martins.

What was martins like on the roads near 2 lives? Awesome roads btw lol

Just need a starting figure.. My be ok standard lol

J o n
10-02-2005, 16:12
it's only chav cos Northy's had it done to his 'standard' (ahem!) Williams ;) hehe

i have to wind him up about it Winston you see, as he winds me up about my sister... in fact, i'm surprised he's not done a post called 'Jon's Sister' lmao

Winston
10-02-2005, 16:16
lol

But northy is a chav :wink:

northy
10-02-2005, 16:16
lol...mine came like that - just to clear this up.

But once i get the right size tyres on i will get together with gaz and ensure mine is at the correct spec.

J o n
10-02-2005, 16:18
lol

But northy is a chav :wink:

lol, exactly! ;)

yeah, it came with the K&N, Peco big bore and Neons... of course it did ;) lol

northy
10-02-2005, 16:20
right....your banned...not having out bursts like that.

VIPERONE
10-02-2005, 16:21
Winston i'll measure mine.... it has willy 2 backa xle at standard height settings

J o n
10-02-2005, 16:21
well they let me say Peco and Neons on CS :cry:

...dont like you anymore... lol :roll:

2 live
11-02-2005, 09:29
it's only chav cos Northy's had it done to his 'standard' (ahem!) Williams ;) hehe

i have to wind him up about it Winston you see, as he winds me up about my sister... in fact, i'm surprised he's not done a post called 'Jon's Sister' lmao

but she is fit mate lol

KingStromba
11-02-2005, 09:34
Hey, how you doin'? :wink:

J o n
11-02-2005, 11:27
PMSL

okay, first one to send me £100 in the post can have her number ;) hehe

Winston
11-02-2005, 12:13
Pics lol

back on topic

mines
280mm on the front
315mm on the back

Zollo
04-03-2005, 20:01
Incase you were still after some ride height examples, mine is -

300mm at the front
310mm at the rear

Only had the car about a month now, but as far as I'm aware, it's standard (though it has quite a harsh ride) and is not stripped-out.


Matt

Winston
04-03-2005, 20:10
Thanks for that :D

And welcome to the forum

northy
04-03-2005, 20:17
any more lads

gaz / matt & jesus whats your

MatBrown
05-03-2005, 17:15
The standard ride height for the Williams should be:

H1 - H2 = 121.5mm +/- 7.5mm (Front)
H4 - H5 = 45mm +/- 7.5mm (Rear)

Where H1 and H4 is the centre of wheels to ground,
H2 is Front side member to ground at wheel axis,
H5 is Rear suspension arm axis to ground.

Vehicle should be unladen, on a flat surface with full tank of petrol and correct tyre pressures.



Mat.

Slithers
05-03-2005, 19:37
Ill measure mine tomoz, as its just been raised back to standard :oops:

Winston
06-03-2005, 00:51
Ill measure mine tomoz, as its just been raised back to standard :oops:

How much did it cost you?... if you don't mind me asking, dieing to get mine done you see