View Full Version : Williams ride height on the rear?
Please could someone measure from the centre of the wheel to the arch for me.
Just need to know how much higher mine is stripped out.
Cheers
winston
Front as well if you can :D
northys is 300mm, anyones different?
KingStromba
10-02-2005, 10:37
Ill check tonight
northys is lowered tho :wink:
not at the front its not.
Not too sure on the rear now...was parked against another 3 one owner from new and that was the same height as mine.
another fellor modder then Northy! personally it's gotta be standard all the way for me ;) lol
and me lol.....well ride height anyway lol
and me lol.....well ride height anyway lol
your not into this chaved up lowering of the rear either then Jon? ;)
lol
Chaved up :shock: lol
Go kart stylee...Its so high on the back at the moment..hopeing to have it a similar ride height to Martins.
What was martins like on the roads near 2 lives? Awesome roads btw lol
Just need a starting figure.. My be ok standard lol
it's only chav cos Northy's had it done to his 'standard' (ahem!) Williams ;) hehe
i have to wind him up about it Winston you see, as he winds me up about my sister... in fact, i'm surprised he's not done a post called 'Jon's Sister' lmao
lol
But northy is a chav :wink:
lol...mine came like that - just to clear this up.
But once i get the right size tyres on i will get together with gaz and ensure mine is at the correct spec.
lol
But northy is a chav :wink:
lol, exactly! ;)
yeah, it came with the K&N, Peco big bore and Neons... of course it did ;) lol
right....your banned...not having out bursts like that.
VIPERONE
10-02-2005, 17:21
Winston i'll measure mine.... it has willy 2 backa xle at standard height settings
well they let me say Peco and Neons on CS :cry:
...dont like you anymore... lol :roll:
it's only chav cos Northy's had it done to his 'standard' (ahem!) Williams ;) hehe
i have to wind him up about it Winston you see, as he winds me up about my sister... in fact, i'm surprised he's not done a post called 'Jon's Sister' lmao
but she is fit mate lol
KingStromba
11-02-2005, 10:34
Hey, how you doin'? :wink:
PMSL
okay, first one to send me £100 in the post can have her number ;) hehe
Pics lol
back on topic
mines
280mm on the front
315mm on the back
Incase you were still after some ride height examples, mine is -
300mm at the front
310mm at the rear
Only had the car about a month now, but as far as I'm aware, it's standard (though it has quite a harsh ride) and is not stripped-out.
Matt
Thanks for that :D
And welcome to the forum
any more lads
gaz / matt & jesus whats your
MatBrown
05-03-2005, 18:15
The standard ride height for the Williams should be:
H1 - H2 = 121.5mm +/- 7.5mm (Front)
H4 - H5 = 45mm +/- 7.5mm (Rear)
Where H1 and H4 is the centre of wheels to ground,
H2 is Front side member to ground at wheel axis,
H5 is Rear suspension arm axis to ground.
Vehicle should be unladen, on a flat surface with full tank of petrol and correct tyre pressures.
Mat.
Slithers
05-03-2005, 20:37
Ill measure mine tomoz, as its just been raised back to standard :oops:
Ill measure mine tomoz, as its just been raised back to standard :oops:
How much did it cost you?... if you don't mind me asking, dieing to get mine done you see
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.