PDA

View Full Version : Boot badge!



Allan
28-04-2005, 04:06
On my valver, the badge on the rear is the gay one off a phase 3 can i get a replacement badge ? also there is a hole in the boot where the old badge should be fitted as the gay looking on is too far over ...

Allan
28-04-2005, 04:07
http://www.niggy.co.uk/car3.JPG

picture of the badge

I removed that gay 16v badge to find a hole under it !
looking in the haynes manual it shows that the clio badge should be mounted in this

summeh
28-04-2005, 10:58
argh gay phase 3 clio badge !!!

summeh
28-04-2005, 10:59
you can get a replacement from Reno... or try the scrappy prolly cost u 50p.

KingStromba
28-04-2005, 11:02
I may have a spare badge Allan

Allan
28-04-2005, 15:37
if i take that gay badge off will it have a hole behind it too ? and should i be able to put the standard badge back on easily ?

Allan
28-04-2005, 15:47
although if i get it painted i will get it debadged i think

FATBOY
28-04-2005, 18:50
i reckon mate that if you take the gay CLIO badge of there wont be a hole under it(cos who is gonna take the original(and best) clio badge of the car and put the gay one on and drill a hole for it when it can just as easily be stuck on!