Engine mount replacement and heatshield help pls.

[FincH]

Hi.

I'm going to try replacing the gearbox/battery tray engine mount on the Valver today but am just curious as to if it's a simple swap over job or does it need to be aligned correctly and torqued up? I dont have a torque wrench btw :)

Also is the mount the same on all the models? Not an uprated one for the 1.8 or anything?

Also I might need to remove the lower downpipe heatshield. Is this hard?

Because basicaly that heatshield is touching a pipe on the PAS rack and making a noise so something needs doing.

Cheers.

[Lunner]

PIss easy, support the engine under the sump, remove mount, and replace with new one, just do tehbolts tight, but not stupidly tight

Don't remove the heatsheild work out why its touching teh pas rack