PDA

View Full Version : The valver is p***ed


projectvalver
29-10-2006, 19:36
The valver is p***ed, after buying some susension front springs/shocks and rear shocks it now looks like this.... :shock:

http://img232.imageshack.us/img232/2264/dscf0285gx4.jpg (http://imageshack.us)



Today i reset the torsion bar on both sides but still seems like one side is lower than the other :( any reason for this?

The springs are ok and not broke... one side of the rear looks lower than the other altho i set the torsion bar to be excatly the same on each side.... :roll:

Any advice would be GREAT
projectvalver
30-10-2006, 08:31
dump :roll:
Lunner
30-10-2006, 10:13
Have you driven it yet???

Suspension has to settle after its been jacked up
projectvalver
30-10-2006, 10:38
yeah been driving it for a week now still slightly out..
Flan
30-10-2006, 11:30
you checked he front springs are seated properly!!
Mr.AdamB
30-10-2006, 11:45
could the shocks be knackered??
Rich
30-10-2006, 11:49
you measured the actual lenght of the shockers? my valver was like that when i first got it and it was due to someone putting odd dampers on it before me :evil:
bass_direct
30-10-2006, 15:33
shockers are newish gmax supplied by me! they're about 5 months old! all the same shockers/springs!
Lunner
30-10-2006, 16:28
shockers are newish gmax supplied by me! they're about 5 months old! all the same shockers/springs!

Well thats why its ****ed if you supplied the parts :lol: :wink:
bass_direct
30-10-2006, 16:37
:lol: lol