Annoying vibration.

[FincH]

When accelerating or blipping the throttle in the Valver I get an annoying vibration and horrible sound. It sounded like the CAT was touching the heatshield after I had it fitted for the MoT, but now with the de-cat on and the exhaust system adjusted it still does it but not as bad.

Any ideas?

Cheers.

[northy]

is teh backbox hiting the rear axle ?

[FincH]

Nah don't think so.

I adjusted it all yesterday, got it running smooth.

It feels like it's from the front somewhere. The whole dash vibrates :shock:

[AmDaMan]

could it be an engine mount late? Does it go away if you keep the revs up?

[FincH]

I did also replace the dogbone mount yesterday with a genuine Renault one... lol

Erm yeah it does kind of settle down a bit if I kep the revs at say 4k.....but if I floor it, it comes back :(

[AmDaMan]

missfire? How are the plugs and leads etc

[FincH]

Nah deffo not a missfire.

Looked at the manifold today and the lower part, especialy the heatshield on the mani looks very close to the steering rack.

I can only imagine it's that tocuhing and sending vibrations through the steering column.

Weird tho as it randomly happend one day :/

How can I stop it? :)

[northy]

if its the heatshield on the manifold u can remove it - i dont have one and never had any trouble. if u want to keep it repair the missing screws.

[wavy]

iv got a similar prob
around 3500 rpm i get a rattle goes at 4500 i cant see anything lose ?

[valver_pete]

downpipe heatshield, under the manifold. Its in two parts joined by two screws either side. theyl either be missing somewhere or loose.

[valver_pete]

downpipe heatshield, under the manifold. Its in two parts joined by two screws either side. theyl either be missing somewhere or loose.

[Andyvalver]

Check teh downpipe isnt hitting the dogbone mounts. My fooker used to and i couldnt stop it no matter how hard i tried and how much i adjusted the zorst. In the end an industrial size jubalie clip sorted it :lol: