PDA

View Full Version : Cheap IK Mod



VIPERONE
18-10-2006, 22:50
Hose: 90mm vensport ducting.

wire reinforced

coupled to airbox, intake = the nearside blanking blate at the side of the fog light.. jam it in..lol

http://i4.photobucket.com/albums/y109/gunnergibson/ik1.jpg
http://i4.photobucket.com/albums/y109/gunnergibson/ik3.jpg
http://i4.photobucket.com/albums/y109/gunnergibson/ik2.jpg
http://i4.photobucket.com/albums/y109/gunnergibson/ik4.jpg

VIPERONE
18-10-2006, 22:50
crude but effective

arj256
18-10-2006, 22:55
I had the same but with a fiberglass airscoop in the foglight hole, and never noticed much difference tbh.

VIPERONE
18-10-2006, 22:58
http://i4.photobucket.com/albums/y109/gunnergibson/gunnersblkbay.jpg

The above pic is the old IK, awesome roar, the best of any kit ive heard...however..

I noticed the ik has alot more low down torque but mid to upper range its flat, and consumes copious amounts of fuel.

tube availible from venair.. or something on ebay or cliosport

£20 the tube is then cut to fit..

midge
18-10-2006, 23:05
where do i get this pipe from

MattyH16valver
18-10-2006, 23:14
demon tweeks I believe

VIPERONE
18-10-2006, 23:25
Vensport off ebay , he is on clio sport also

VIPERONE
18-10-2006, 23:34
YOU NEED:

a 1 metre length of caf @ 85mm?

pm himon clio sport his user name is andy905

northy
19-10-2006, 08:04
nice one gunner....i agree the hill power does sound very nice !

stew
19-10-2006, 08:29
i have a similar setup using 80mm pipe as it fits the airbox a little better, then routed down to a scoop in the foglight hole.

car feels much more responsive, especially pick up at speed.

Martin
19-10-2006, 08:53
I concur...mine has ducting to a fog scoop good enough for a 13.91 :)

wavy
19-10-2006, 13:03
:gay:
I concur. :gay: lol get her :lol:

looks an easy mod 2 do

VIPERONE
19-10-2006, 21:00
I concur...mine has ducting to a fog scoop good enough for a 13.91 :)
there was a fault witht hte timing appliances that day

pat_986
26-10-2006, 11:11
Just ordered now!

Do you ever need to worrie about rain/crap getting sucked up the CAF??

mattyc
26-10-2006, 15:08
how do all of you guys get the feed to the foglight? do you need to cut a hole? because the last time i checked theres not a big enough gap to get the pipe through

Amirclio
26-10-2006, 16:30
Ive done this works a treat! I agree with the hillpower sound is awesome and low down torque is good, but any further up the range its completely flat!
Ive routed mine through the hole where the original ducting goes and to the blanking plate!

MattyH16valver
26-10-2006, 18:29
how do all of you guys get the feed to the foglight? do you need to cut a hole? because the last time i checked theres not a big enough gap to get the pipe through
Yes you have to cut away the metal bracket that holds the original cold air pipe in place. Look at my reply in the following thred....should help...http://www.williamsclio.co.uk/forum/viewtopic.php?t=2452&highlight=cold+air+feed

VIPERONE
26-10-2006, 19:13
Just ordered now!

Do you ever need to worrie about rain/crap getting sucked up the CAF??

no unless you have no filter..naturally dont drive through deep water.. unless you run a landrover snorkel system

Andy P
26-10-2006, 21:27
Got for the foglight option. I have a ally flexi pipe going to my airbox.

£7 from Halfords baby, chavved right up :wink:

pat_986
26-10-2006, 21:34
Just ordered now!

Do you ever need to worrie about rain/crap getting sucked up the CAF??

no unless you have no filter..naturally dont drive through deep water.. unless you run a landrover snorkel system
LOL!

Cheers, glad I have nothing to worrie about!

FincH
26-10-2006, 23:18
Handy also if you have a tumble dryer...