View Full Version : Aux belt tensioner pulley..Help!!!
valver_pete
17-10-2006, 20:09
Tried everything to get this thing loose to fit my new belt but it just wont budge! Anyone with any ideas or solutions?
MatBrown
17-10-2006, 21:36
Have you undone the 7mm allen key in the centre?
Mat.
valver_pete
17-10-2006, 21:40
thats the bit i cant get loose!
VIPERONE
17-10-2006, 21:44
allan key to hold it spanner over it to undo it... yes there a twat.. i rippered the teeth from the brack on mine... so had to mod the tensioning system
valver_pete
17-10-2006, 21:52
Cheers guys, gona give it another go tomorrow when my strength and patience have returned!!
undo the alt bracket and pivot it in, fit belt pull back out tighten up, job jobbed
valver_pete
18-10-2006, 22:29
exactly how ive ended up doing it coz that thing wasnt coming loose! :)
VIPERONE
18-10-2006, 22:31
undo the alt bracket and pivot it in, fit belt pull back out tighten up, job jobbed
aided with a bar lol
i wouldnt advise drinking whilst working.
VIPERONE
18-10-2006, 22:55
lol
---
witty ;-)
willy3ams
19-10-2006, 14:22
see my review on changing the alternator.
it shows you pics of how i did mine.
use a 7mm allen bolt in a 10mm rachet spanner.
Manual steering conversion, never have these problems, and there is a lot more room in there for work too :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.