PDA

View Full Version : Hybrid update.


Andy P
15-10-2006, 17:21
Been doing a few bits and bobs to it. Joined the darkside now and gone lightweight. Not too much though :)

Sparco Sprints and harnesses, and yeah i need the cushion :lol:
http://i19.photobucket.com/albums/b176/andipeat/clio012.jpg
http://i19.photobucket.com/albums/b176/andipeat/clio010.jpg

Also gone for the cold air feed option with black mesh on drivers side. This is on a weigh bridge where it weighed in at 900kg 8)
http://i19.photobucket.com/albums/b176/andipeat/clio001.jpg

Nice bit of D600 quality!

And combined with the new RR figure she works out at 205 bhp/tonne 8)
http://i19.photobucket.com/albums/b176/andipeat/RR002.jpg
http://i19.photobucket.com/albums/b176/andipeat/RR001.jpg

Racer Stance :wink:
http://i19.photobucket.com/albums/b176/andipeat/clio009.jpg
richy
15-10-2006, 17:26
looking good, what u taken out to get down to 900kg? just the seats?
Andy P
15-10-2006, 17:50
Pretty much mate. Seats belts parcel shelf spare wheel and cage. And the light buckets. Think they are 7kg each?!
richy
15-10-2006, 17:52
yeah i have the same seats, had them for while, had to buy a sparco cushion for the base aswell lol gets abit sore on long trips!

mines should be abit lighter then that aswell lol taking more then that out!
Andy P
15-10-2006, 17:56
Very low, and they tend to make my back ache. 900kg is light enough really. Doesnt comprimise it too much but helps with acceleration.

This week it is repaint the wheels in satin black and slap some new pads on!
Joel
15-10-2006, 17:58
needs some willy rims on Pal :D
richy
15-10-2006, 17:58
:D

wilwood 4pots are they forward! :wink:
Andy P
15-10-2006, 18:00
Willy rims, common :lol:

19 rims, sweet as :P

My mate has just bought a Dimma clio with willwoods. She wont sell them to me though.

And she only bought the car for the plate :twisted:
thelynx
15-10-2006, 18:42
Looking sweeeeet and goin sweeet to....
Lunner
15-10-2006, 19:10
900kg is light for what you've taken out!!
MattyH16valver
15-10-2006, 21:47
Beast....u must have taken some serious shit out of that! :shock: Lol at the cushion :lol:
jay s
16-10-2006, 00:28
very nice, shocked at it being 900kg tho, mine must be about that aswell as ive got the same setup in mine. i know what u mean with the cusion, need one myself as i get a saw arse after sitting in it for more than an hour :roll: where did u get the fog light intake from?
Andy P
16-10-2006, 08:34
Got it off Winston mate.

It was 920kg with about 1/4 tank of fuel, so im accounting for the fuel too
Zollo
16-10-2006, 09:37
Looking gooooooood :twisted: 8)