PDA

View Full Version : chipwizards



Matt_16v
05-10-2006, 16:45
anyone got the number?? need to get a qoute on having my willy engine with big valve head mapped!!!



cheers


matt

jay s
05-10-2006, 17:05
http://www.chipwizards.co.uk/

wonder if his any relation to phillip :lol:

Winston
05-10-2006, 17:43
Poor joke .....cracked me up tho lol :oops:

jay s
05-10-2006, 17:53
:cheese:

nyk
05-10-2006, 18:13
LOL

AKA Wayne the Brain

Expensive- but very good. He got 220bhp out of my mates red top corsa GSI.

Matt_16v
06-10-2006, 09:14
i've tried that number a few times, can never get through :cry:

bass_direct
06-10-2006, 21:12
lol yeah^^^

first time i rang him few weeks ago, i got through first time!!

VIPERONE
09-10-2006, 20:56
let me know when your up.. i'll bob down with you, he'll prob offer you a discount..

Daz.
09-10-2006, 21:53
let me know when your up.. i'll bob down with you, he'll prob offer you a discount..

I'll remember that one in months to come :D

2 live
10-10-2006, 08:14
lol...u mite even get a bit more knocked off if we both turn up ;)

Daz.
10-10-2006, 17:45
Bring it on! group hug discount 8)

valver_pete
21-10-2006, 17:37
is there much benefit to be had from having the standard ecu re-mapped with a few basic mods?

cliolord
21-10-2006, 17:54
if your doing this group mapping thing, wait a little bit and I will be having my willy lump mapped aswell! :lol: That is also going to be a big valved head!

Valver pete, yes there is. It's suppose to increase fuel economy on high octane fuel (which you have to run) and it's said that flat spots are ironed out. Not a great deal of power is gained but it's something I guess plus you don't have to worry about ripping the block appart or taking the engine out

Matt_16v
31-10-2006, 19:38
we still o =n for this guys?? ^^^


i will ask when i ring again??


matt

matty
31-10-2006, 20:01
anyone got the number?? need to get a qoute on having my willy engine with big valve head mapped!!!



cheers


matt

My Megane BE with Big Valve 1.8 head produced 190bhp after Wayne had finished with it. May have loosened up a bit now and cams aren't properly timed for power either.

Be interested to see how you get on.

Definately worth going to Wayne. Can leave car and go into Manchester for the day too unless you want to watch (which I didn't)

Matt_16v
01-11-2006, 19:33
lol, yeh wouldnt have a clue where i would be going, never been there before!! lol

i am hoping for acheive around 200 bhp

matty
07-11-2006, 09:13
Get cams set up properly on rolling road before the remap and then you should get better results than I did.

VIPERONE
07-11-2006, 12:46
lol...u mite even get a bit more knocked off if we both turn up ;)

depends if you offer him a nosh again

Matt_16v
07-11-2006, 18:40
matty:

did craig build an engine for you recently??

Didnt you make just over 200bhp??

stan
07-11-2006, 18:45
yup i built his a few months ago...it made 190ish bhp. the cam timing was set quite conservatively.

Matt_16v
07-11-2006, 18:58
http://www.williamsclio.co.uk/forum/viewtopic.php?t=16028

what do you reckon stan???

cliolord
07-11-2006, 19:00
right lads. I got the car now, the head is with Craig and I really want to get it mapped at chipwizards. If you can, any chance of waiting until i've wacked the engine together and dropped it into my valver? Group disconnect and all :wink:

cliolord
07-11-2006, 19:02
mate, i would not nitrous it, seriously. Too much money to loose. NOS burns so hot in the bores it can even take the top off your pistons if your not careful but obviously it's up to you. You also have to think about the gearbox...That sudden surge of extra power could snap you input shaft etc. Would be really cool if you had no problems though I guess :roll:

Matt_16v
07-11-2006, 19:04
hmmm yer im a bit 50/50 atm....

i think i'll see how scary my engine is when its in....

When is yours going to be done cliolord??

stan
07-11-2006, 19:30
I would use nitrous on it really.

The piston ring end gaps wont be set for it for one....and i wouldnt like to say "only 50bhp would be ok" then it fails.

stan
07-11-2006, 19:31
edit: WOULDNT use nitrous lol

Chris H
07-11-2006, 21:49
it'll be fine unless you have a 55 gallon drum filled with NOS and you use it all at once!

You know it'll be fine Craigy mofo!

BenR
07-11-2006, 22:10
you wont be able to use much anyway since you cannot run a switchable map system for N20.

And i dont suppose anybody wants to run a permanently 'weak' road map just for the periods that they play with N20.

N20 on a road car is pointless IMO unless you plan to deal with its short commings.

cliolord
09-11-2006, 19:41
50bhp ontop of a standard williams engine would be insane. 50bhp might not sound alot but in reality, it would be alot of juice. I would be thinking of a 25 shot if I was you :lol: think about the input shaft/diff when you put an extra 50bhp though it ontop of the 170+ that your running out of the williams lump. I don't think it would last long...

cliolord
09-11-2006, 19:43
hmmm yer im a bit 50/50 atm....

i think i'll see how scary my engine is when its in....

When is yours going to be done cliolord??

Should be around xmas time...Jan latest. Once the head is back with me I will by the auxileries (turbo clutch/T-belt + Tenioner etc).

If you guys are in a real rush to get it chipped and all excited and stuff, I understand :lol: I cant wait to get this F7R fired up!

Matt_16v
10-11-2006, 17:29
clio lord.....

I'm hoping to get mine mapped about that sorta time too mate....I should have mine in next month or so.....

Mattie
10-11-2006, 21:11
thinkin about gettin mine done soon as well....not sure if its worth it without full breathing mods and cams though

cliolord
11-11-2006, 15:52
thinkin about gettin mine done soon as well....not sure if its worth it without full breathing mods and cams though

I dont really rate the "breathing mods" much mate. Certainly not the "induction kit" and the open air filters. De-cat is all you really need. I am thinking of replacing my exhaust system with a standard 16v system as the knocking is doing my head in :roll:

Mattie
12-11-2006, 15:24
im playing with getting a SS manifold before remapping but not sure