View Full Version : AngelWorksTechnology Throttle bodied Hybrid

23-04-2005, 01:18
Thought i'd let you guys have a look at the latest pictures, not far off completion now.
Williams track and coilovers are sorted, just need height and tracking etc sorted once the car has been put back together. ECU and loom are in place, head is ready to be bolted on.

23-04-2005, 06:47
8) ....looking good matey, thought u where meant to have it back a while ago??

U need to get on the Track Day with that now mate.

23-04-2005, 07:57
is that gonna fit ?

gonna be tight...

Steve a
23-04-2005, 10:56
Beast, keep the pics coming!

23-04-2005, 11:30
Yeah it has had some problems with parts not being there, Willy track needing a new rack 'cos old one had seized up track rods, and the usual problems associated with a demo project. All looking good to go now.
Brun, it does fit, JUST, rather sexy custom ally rad with a chunky ass fan is being dropped in, and the slam panel is being modified to fit the biigest trumpets possible. If you look at the way they point as well, when you look down the trumpet, its just one straight path to the head :wink:

23-04-2005, 14:04

23-04-2005, 17:56

23-04-2005, 18:11
thats awesome... do filters go on the end of those?

Irish Nut
23-04-2005, 20:26
That looks fecking awesome in the pics, Jesus was telling me about this a couple of weeks ago. Way cool man!!! :P

24-04-2005, 00:09
Awesome mate....bloody awesome!

24-04-2005, 18:38
very nice clean....bet you carnt wait to give this motor a good run.

You aiming to 1/4mile it next season ???? :wink:

24-04-2005, 22:34
Enjoy it while it lasts :roll:

24-04-2005, 23:44
lol.. :roll: :roll:

26-04-2005, 21:51
do you boys know how to spell 'haters'?

26-04-2005, 21:59
Good luck fella!!

26-04-2005, 22:01
when's it due back clean? I wanna see this beast run at york.

26-04-2005, 22:02
Getting mapped a week today, in the middle of exams, and need to co-ordinate with Jon on when we go and oick it up, can't wait!

26-04-2005, 22:09
do you boys know how to spell 'haters'?

You have lost me, its easily done I grant you :?

27-04-2005, 22:40
For all you haters out there!

J o n
27-04-2005, 22:56

Nick, is that a pic of you in yer avatar? you look like Gandolf dude

27-04-2005, 23:11
Sweet as....do you not fancy chopping some holes in the bonnet for ultimate air flow??

J o n
27-04-2005, 23:17
Sweet as....do you not fancy chopping some holes in the bonnet for ultimate air flow??


27-04-2005, 23:21
If it was done properly it would look ok and if it gave more power I'd do it! lol

J o n
27-04-2005, 23:26
hehe, nutter!

28-04-2005, 08:42
Will it be having the individual sock type air filters?

28-04-2005, 10:36
No its having a sausasge typr filter. Martin, the thought has crossed my mind but i reckon it'd be hard getting it to look good.....might see how i get on as it is, my main problem will be traction rather then more power!

28-04-2005, 10:46
I'm so technical I thought they were Four air horns :wink:

28-04-2005, 10:59
Holey moley clean, looks amazing mate, so whens' the next meet so we can check out cleans and Brun's new stuff?

Clean, when is the meeting to get a quote for the full respray?



28-04-2005, 11:03
Looking good there fella, toot toot

28-04-2005, 11:32

28-04-2005, 15:38
Danny, catch me on MSN if you're serious about the bodyshop, i reckon i'm just ognna go with a few mates as no one seems to be madly interested

28-04-2005, 15:56
are you sticking with black hoses of fitting samco coloured?

28-04-2005, 16:06
For the time being it is being kept standard....unless you know where i can source some cheap?

28-04-2005, 16:11
You have any warranty / guarantee with this car?

28-04-2005, 16:12
A few things have been guarenteed........enough to make me part with my money.

28-04-2005, 16:13
Is the engine being rebuilt around the mods? Ie will you have to run it in?

28-04-2005, 16:17
im picking up my blue samcos tomorrow... they are free... which was a deal made to me by the guy i bought the willy 2 off.

There is a company that makes then then distributes them to samco.. ie reselling.

28-04-2005, 16:51
the engine wont need running in as its spending 8 hours on the rollers on tuesday, so it'll be run in nicely

J o n
28-04-2005, 17:03
plus, no point rebuilding a healthy low mile bottom end, Ben inspects em to make sure they are okay.

28-04-2005, 17:09
that looks ace pal, lookin forward to seein it in the flesh!

have you had any bottom end work done at all mate out of interest?

28-04-2005, 17:40
no bottom end work been done Craig, obvious risks being taken there but the bottom end is in top notch condition according to Ben, and rev limit will be set accordingly so we dont encoutner any problems

28-04-2005, 17:41
8 hours :-) will be an interesting day of major mapping!..
has the beast been started up yet?

28-04-2005, 17:41
i say 8 hours....its been booked in for a full day, so whatever that is, if it needs more then so be it!

28-04-2005, 21:47
What tyre you running on front to help traction?


28-04-2005, 21:52
Not decided yet, what would you recommend?

28-04-2005, 21:53
King stromba aproved 185/55 inner tubes :lol:

btw can't wait its going to be sick!!!!!!!!

28-04-2005, 21:54
Well i think youll need at least 195s to get better traction. Doesnt Nick Read run 205's?

28-04-2005, 22:25
i think im going for the ones 9 Lives uses, he doesn't seem to have any traction problems and his car is a monster. 205's are they? PE2's of course....
Winston, can't wait either, but its almost straight away going to the bodyshop, unless you wanna swing by before to se it? Gibbo too?

28-04-2005, 22:48
Defo be swinging by......or trying to keep up on the way to the bodyshop:twisted:

29-04-2005, 07:19
i'll certainly be swinging by!l lol how can i not!

29-04-2005, 07:36
Feck its like waiting for a baby to be born, good luck :wink:

Irish Nut
29-04-2005, 08:17
Can't wait to see this beast unleashed! :D

03-05-2005, 12:13
it's alive! Strted first time on a basic map that Ben had prepared, should have a power figur by the end of the day. Fingers crossed

03-05-2005, 12:20

03-05-2005, 12:31

J o n
03-05-2005, 12:34
thing thing's gonna be mental, cant wait to find out what sorta power it makes!!!

03-05-2005, 14:45
Swweeeeeeeeeet!!!!! 8)

03-05-2005, 17:38
200bhp mark passed at 6200rpm, still got 1k left, and the rollers are meant to be conservative!

Steve a
03-05-2005, 18:42
:shock: :) :D 8) :twisted: Beast!

03-05-2005, 18:46
nice one mehdi, thats what we like to hear!!!!!! :)

04-05-2005, 16:32
looking good, 200bhp on 1800cc?

Do you know how much the torque has increased yet?

04-05-2005, 16:36
It's a 2.0 fella..

04-05-2005, 17:50
torque should be up quite a bit on the 2L?

what cams is it running for 200bhp? and how much did it cost ££££?

04-05-2005, 18:12
price on appllication mate, not got a power figure yet, its being power run today, expecting 210ish bhp, no torque figure yet either but should be healthy. Test drive yesterday had it spinning, a lot, but it was wet and on crappy tyres....

31-05-2005, 17:50
216 bhp, over 150lb/ft of torque from 4500 rpm,over 160lb/ft from 5k all the way to the 7300rpm redline peaking at 169lb/ft.
All is done, getting picked up on saturday as im hoping to have the 4 pots fitted this week

Irish Nut
31-05-2005, 17:58
Sounds mental dude :P

31-05-2005, 21:21
Excellent whens it coming out to play? :)

31-05-2005, 22:33
glad to hear it!

01-06-2005, 00:53
not sure mate, depends on when the next 1/4 day is! It may have to go down to the pod as York doesn't have anything going on for a while!

01-06-2005, 07:06
either way its gonna kick some right arse!!! :lol: :D

Chris n`nic
01-06-2005, 09:32
Looking good m8y! The next York is on the 19th June so only a few weeks off. If Nic is ok we`ll go up and have a watch


01-06-2005, 10:46
216 bhp, over 150lb/ft of torque from 4500 rpm,over 160lb/ft from 5k all the way to the 7300rpm redline peaking at 169lb/ft.
All is done, getting picked up on saturday as im hoping to have the 4 pots fitted this week

Should be rapid then :twisted: get some videos up as soon as you can !

are you gona use a LSD ?

01-06-2005, 13:01
he's normally got a penchant for crack, so the cheap stuff just doesn't do it for him.

(oh, and no LSD)


03-06-2005, 13:07
Ooh those TBs look so good I could almost shag 'em! - if they were wider :P

How much was the whole TB setup?

Crack's cheaper than LSD - er, so I've heard.

J o n
03-06-2005, 14:16
no one will be able to say what the price is mate, it depends on the work you have done, as it is completely customised... ie some people have bottom end rebuilds and new pistons etc when they have this, other dont. Your best sending BenR a PM or e-mail (he's on Cliosport.net) and letting him know what you want exactly... although only ask for a quote if your fairly serious, as he gets grumpy if he has to quote something up and the person has no intention of getting it cos it's a pain in the arse to do. lol