**16v x5, Williams x3, 172 x2 and 182 Breaking for spares** [Archive] - Page 2

Magnumpi

24-01-2009, 20:04

Hi Mat, do you have any Williams manifolds? Even one maybe slightly damaged as i'm going to be cutting it up for a Volvo conversion.

Cheers

Will16valver

26-01-2009, 18:56

y are you cutting up a willy manifold for a volvo engine? just get a custom down pipe, problem solved 8)

Magnumpi

06-02-2009, 21:38

y are you cutting up a willy manifold for a volvo engine? just get a custom down pipe, problem solved 8)

It's a F7R going into my Volvo thats why i need the manifold.

Cheers Mat it arrived today excellent service.

Nice one

number1

17-02-2009, 23:20

Williams Wishbones?? any condition, gonna Rebush em

tpjaws

06-04-2009, 01:06

heya matt, what condition are the shells in that you have left?
desperately in need of a good condition shell. rust on rear arches is fine.
any colour :D
cheers
Tim

WillyRep

07-04-2009, 18:55

hi is there any interior knocking about bincluding door cards.

cheers

MatBrown

07-04-2009, 19:34

Yes mate.

Mat.

whistler-steve

23-04-2009, 09:33

Hi Mat

Do you have a drivers door in 432 kicking around? Has to be in decent condition and not rusted through. PM me?

Steve

MatBrown

23-04-2009, 21:26

I do have one but not sure how good it is.

Mat.

whistler-steve

24-04-2009, 09:46

i'm assuming you have a breakers yard? any chance you could PM me your postcode and let me know what condition that door is in?

MatBrown

24-04-2009, 19:16

Not quite.
But postcode coming your way.

Mat.

pick

27-04-2009, 16:45

got a working crank sensor?? please mat

MatBrown

27-04-2009, 18:13

Yes mate.

Mat.

thaijedi

27-04-2009, 18:47

matt do you have a williams flywheel and a low temp thrmo stat?

MatBrown

27-04-2009, 19:39

Yes mate.

Mat.

thaijedi

27-04-2009, 20:26

wicked is that yes to both..?

How many pennys do you want. Im in Basingstoke hampshire if your not to far then i could come and collect

MatBrown

27-04-2009, 23:13

I'm in Hinckley, Leics.

Mat.

thaijedi

28-04-2009, 09:46

ok well how much would you want for the parts...

phil

01-05-2009, 16:50

Hi mat do you have a metal centre cap for this please

http://i568.photobucket.com/albums/ss124/phil74/wheels1.jpg

If so, how much thanks phil 8)

MatBrown

01-05-2009, 19:55

Not got any any of those at the mo.

Mat.

phil

02-05-2009, 01:02

Cheers mate do you know if and when you'll have any got 3 already thanks again

x_tara121_x

02-05-2009, 09:56

have you got a decent heater control units? the blower on the valver is dead, circuit board has all melted inside!! looks like its been on fire at some point, used to be a good smack n it would start workin again but not no more

MatBrown

02-05-2009, 11:10

Cheers mate do you know if and when you'll have any got 3 already thanks again

I need a full set myself so won't be for a while.

Mat.

MatBrown

02-05-2009, 11:10

phil

02-05-2009, 18:07

Cheers mate do you know if and when you'll have any got 3 already thanks again

I need a full set myself so won't be for a while.

Mat.

What do you need for a full set i have 3 plastic ones and 3 metal ones but only need one metal one

MatBrown

02-05-2009, 18:24

I don't have any, so need a set of four.

Mat.

nuttynutter123

05-05-2009, 11:40

hi mate have you got any phase 2 rear quarter bump strips (moulds)? need both sides.

If so how much delivered?

Cheers

MatBrown

05-05-2009, 21:46

Would want to sell them as a full set really.

Mat.

nuttynutter123

06-05-2009, 08:59

no worries, i have some lined up now thanks.

Do you have a infra red reciever for the central locking available? if so how much delivered?

Cheers

pick

07-05-2009, 19:15

you have a pm Mat.

MatBrown

02-06-2009, 22:57

I'm attending FCS this year so if there is anything you want/need give me a shout and i will try and bring it along with me.

Mat.

M@X

04-06-2009, 08:14

Hi Mat

How much for a offside headlight for willy 2, delivered
Cheers Max

smithyone90

10-06-2009, 16:48

standard air box for 16v dunno if theres a difference with the willy 1 from 16v?! how much if u do have 1 and where are you please. ta

MatBrown

10-06-2009, 21:32

Based in Hinckley, Leics but don't think i have any standard airboxes.

Mat.

Chesh

29-06-2009, 03:01

Hello mate, do you have any willy shocks for sale?

MatBrown

04-07-2009, 08:47

Front or rear?

Mat.

jim8966

05-07-2009, 12:37

hi matt. i have a williams 2 and need a steering wheel ,front fogs ,and passenger side wing mirror.thanks.

MatBrown

05-07-2009, 14:05

Might struggle with the fogs but should be ok with the other bits.

Mat.

Coops

05-07-2009, 14:30

i have minty mint gen valeo fogs for sale mate, pm'd

m4rk3014

07-07-2009, 14:33

Hi matbrown ,please see http://www.williamsclio.co.uk/forum/viewtopic.php?t=36180 can you help me with this mate if so How Much inc P+P ,thanks Mark

jonofdoom

14-07-2009, 02:14

Hello...

I'm after a down pipe and lambda sensor to fit a 1.8 16v clio if you've got them:)

jonofdoom

14-07-2009, 07:25

Hello...

I'm after a down pipe and lambda sensor to fit a 1.8 16v clio if you've got them:)

And a thermostat / housing too... Maybe a couple other bits as I figure out what's needed.

MatBrown

14-07-2009, 16:19

Hello...

I'm after a down pipe and lambda sensor to fit a 1.8 16v clio if you've got them:)

And a thermostat / housing too... Maybe a couple other bits as I figure out what's needed.

Yeah, have both of those.

Mat.

flash

14-07-2009, 19:08

let me know as soon as you have a rolling shell with doors please mr brown :)
valver preffered :)

geesus

15-07-2009, 16:29

hi Mat

i am after a 16v (or williams of they are the same) coolant temp sensor and plug (wiring for it aswell if poss but not 100% necessary)

monies waiting :)

_ol_

11-08-2009, 16:20

Any bits left on this?

MatBrown

11-08-2009, 21:43

New stock always coming in.
What you after?

Mat.

Evogone

11-08-2009, 23:26

Rear beam ?

MatBrown

12-08-2009, 18:37

Yeah, got one off and ready.

Mat.

Evogone

12-08-2009, 19:36

Yeah, got one off and ready.

Mat.

Does it come with discs / caliber and the cast hubs im after...? pm with price etc :D

MatBrown

12-08-2009, 20:16

No calipers fitted. but has some discs fitted and the hubs are on it.

Mat.

Evogone

12-08-2009, 20:54

No calipers fitted. but has some discs fitted and the hubs are on it.

Mat.

pm

simonr85

24-08-2009, 16:02

PMd you mat about rear brake brackets

wrighty

24-08-2009, 16:27

Have you got any fuel lines that run past PAS pump as sprung a leak! CHeers!

MatBrown

24-08-2009, 18:40

Have you got any fuel lines that run past PAS pump as sprung a leak! CHeers!

Yes mate,
Have you got a plastic fuel rail or metal?

Mat.

wrighty

24-08-2009, 19:17

It is a metal fuel rail off a williams 3!

Bloody car, dont want to spend much as will be breaking it soon or just getting rid as is so would be great if you can help.

Let me know how you want paying and I will send cash asap as car is sort of abondoned outside the house. Best not upset the neighbours just yet as no doubt a few curtains will be twitching as I break it!

Cheers Mat

sheps

25-08-2009, 09:26

Any manifold heatshields yet? :cry:

MatBrown

25-08-2009, 18:06

Nothing much good.

Mat.

nuttynutter123

01-09-2009, 21:46

hi, have you got the little tee peice type connectore that the flow fuel pipe connects to the injector rail?

MatBrown

01-09-2009, 22:01

Hmm, the fuel pipes normally just clamp onto the rail?

Mat.

wrighty

01-09-2009, 23:53

nuttynutter123

02-09-2009, 07:53

Hmm, the fuel pipes normally just clamp onto the rail?

Mat.

ill take a picture and post it up later lol

nuttynutter123

02-09-2009, 08:54

see attach

Coops

02-09-2009, 09:12

whats the heck is that thing?! :shock: :? :lol:

busterhymes

02-09-2009, 09:38

looks a bit like an inline pipe connector :?

nuttynutter123

02-09-2009, 10:12

note that the fuel pipe next to it isnt connected to anything... thats the thing it should be connected to. this is a phase 2 clio as well... which i think is a different set up to the phase 1.

Coops

02-09-2009, 10:40

the late phase 2's had plastic fuel rails i believe, but the connectors and fuel lines were all the same as far as i'm aware

busterhymes

02-09-2009, 11:29

ahh plastic fuel rail that makes sense never seen that my williams has alloy rail and myrecently broken williams 3 was alloy too :?

Coops

02-09-2009, 11:37

yeah its a plastic rail but the connector is still strange, pretty sure the plastic rail had exactly same connectors as the metal one, so not sure what that t piece thing is?

busterhymes

02-09-2009, 13:01

plastic rail thats nasty :wink:

nuttynutter123

02-09-2009, 15:47

no one seen them before then lol?

MatBrown

02-09-2009, 17:34

Yeah, i know what you want.
The plastic rails have push-on connectors on the end of the lines.
Not sure if i have any spare ones though.

Mat.

Dravvy

02-09-2009, 21:02

Hi mate,

Have you got any exhausts for sale, looking for a S/S system, small diameter tailpipe.

Oh and also yellow fog's!

Any help?
Thanks

MatBrown

02-09-2009, 21:59

Not got anything i would class as small diameter mate.
Got some yellow fogs but they have corroded slightly.

Mat.

pick

02-09-2009, 22:45

you have a pm mate!!

nuttynutter123

03-09-2009, 09:28

Yeah, i know what you want.
The plastic rails have push-on connectors on the end of the lines.
Not sure if i have any spare ones though.

Mat.

can you let me know if you have anything please mate.

if not how much you want for a fuel rail?

badger bill

11-09-2009, 20:29

do you have a radio, drivers door trim and rear bumper rubber trim for a W2? If so can you let me know how much?

Cheers

BB

jim8966

22-09-2009, 17:39

hi.do you have steering wheel original and two front fogs in good condition.thanks

jim8966

22-09-2009, 17:41

i am after original steering wheel and 2 front fogs in good condition.thanks

Evogone

06-10-2009, 17:17

Need willy or 16v mint subframe.....

demuppetiser

07-10-2009, 20:53

Do you have a standard williams airbox??

Thanks

MatBrown

07-10-2009, 21:31

Hmm, not sure, will check the couple of new arrivals.

Mat.

MatBrown

10-10-2009, 13:20

Yes mate, i have got an airbox available.

Mat.

Riley

11-10-2009, 20:09

you got any exhausts other then scorpion cat backs in?

MatBrown

11-10-2009, 20:18

Got a powerflow, magnex, standard.

Mat.

wavy

15-10-2009, 17:23

mat you have a pm from me :)

jas1159

17-10-2009, 17:25

Do you have a JC5 gearbox?

MatBrown

17-10-2009, 19:30

Not at the mo mate.

Mat.

Patrick_g46

24-10-2009, 13:33

Do you have a good condition original backbox? How much?

Cheers

Patrick_g46

24-10-2009, 13:35

Oh and also a set of horns as mine have died!

MatBrown

24-10-2009, 18:42

Got some horns for sure, might have a backbox too.

Mat.

sheps

01-11-2009, 21:35

Phase 1 ( i think?), passenger side wing mirror glass?

MatBrown

02-11-2009, 00:23

Yes mate.

Mat.

glyn211269

09-11-2009, 02:58

Any chance of the two standard air filter induction pipes for a Phase1 Willy?

7700854534 and 7700854533 i think...

_PAUL_

09-11-2009, 16:01

Mat do you have any front williams suspension by any chance ?
Also do you know if i can put valver springs on williams struts ?

Cheers

Clio_GTT

09-11-2009, 16:34

Mat do you have any front williams suspension by any chance ?
Also do you know if i can put valver springs on williams struts ?

Cheers

Yup 16v springs fit on willy shocks

_PAUL_

09-11-2009, 16:37

Cheers for that mate.
Just got to search for some willy shocks and driveshafts now....Cant find them anywhere :(

memsp1

12-11-2009, 19:46

hello, have you a power rack for a williams 3, thanks mem

MatBrown

13-11-2009, 00:14

Not at the mo mate.

Mat.

cliokiz

13-11-2009, 13:09

see attach

I've got one of these plastic rails spare with the fuel lines if you need it.

The 'T' piece is there as the other end of it is the feed for the 5th injector, rather than taking it off the end of the rail.

Mark E-J

21-11-2009, 14:13

Mat

how much for a std complete airbox for my williams 3 delivered?

Mark E-J

21-11-2009, 15:03

Mat

how much for a std complete airbox for my williams 3 delivered?

Also needed electric mirror control switch and electric switches for windows lights must be working on them please mate total price?

cliokiz

05-01-2010, 12:58

Drivers side 432 wing and mirror if possible please mate.

1995clio16v

17-03-2010, 15:54

You got any Williams ARB's?

MatBrown

17-03-2010, 16:49

Not at the moment as i try and sell the widetrack complete.

Mat.

1995clio16v

17-03-2010, 20:22

OK, well Ill have first dibs on one if one pops up please.

Should be around 3 weeks before I build front end back up.

dimma

22-03-2010, 23:06

have you got a good williams 3 body shell?

MatBrown

22-03-2010, 23:43

No mate.

Mat.

ratboyvalver

26-03-2010, 19:22

have you got R19 16v throttle body ph 2 grill cheers

MatBrown

26-03-2010, 19:37

Got a clio grille but no 19 TB's.

Mat.

richy

26-03-2010, 20:59

have you got a good williams 3 body shell?

is that a trick question lol

MatBrown

26-03-2010, 21:10

Oxymoron? :lol:

Mat.

majestikmoose

22-04-2010, 10:47

Hi Mat,

Have you got a drivers side door lock mechanism/actuator

Wobba

22-04-2010, 16:34

have you got R19 16v throttle body ph 2 grill cheers

Think there is one in a scrapyard up the road...R19 16v Chamade.

MatBrown

22-04-2010, 16:59

Hi Mat,

Have you got a drivers side door lock mechanism/actuator

Yes mate.
PM coming.

Mat.

majestikmoose

10-05-2010, 10:19

Hi Matt, Im after a heater blower for a williams 2 If you have one, Cheers

MatBrown

10-05-2010, 18:22

Yes mate.

Mat.

zeus

08-06-2010, 00:15

Hiya, have u got front bumper for williams 1 clio in good condition?

MatBrown

08-06-2010, 17:12

I've got one in fairly good condition.

Mat.

Tommy

22-07-2010, 13:53

At this moment in time i am after the following in good condition...

f16ie cover
449 drivers wing
willy 1 front bumper
willy 1 side strips
gear knob
parcel shelf & suit carrier

pm me if any are available!

thanks,

Gary16v

22-07-2010, 23:14

Hi mate do you have Williams 1 door strips??

MatBrown

23-07-2010, 14:31

Not at the mo mate.

Mat.

ratboyvalver

24-07-2010, 18:28

hi buddy you got a valver front brake calipers?

MatBrown

24-07-2010, 20:08

Yes mate.

Mat.

MatBrown

03-10-2010, 16:46

Also got a Mk2 172 breaking.

http://i202.photobucket.com/albums/aa224/matrickbrown/172breaking1.jpg

Mat.

Dunc

25-10-2010, 11:27

matt, needing a pair of williams rear brake calipers asap!

The handbrake MUST work on them lol

Dunc

fasterthanjesus

18-11-2010, 22:19

need rear rails, both sides.
need front hubs with abs sensors.
need rear axle and associated parts to torsion bar. mine completely seized.
need front suspension, mine seized.

have box to put on boat. central location.

helpz!

MatBrown

18-11-2010, 22:30

Rails?
Not got any ABS hubs left at the mo.
Front suspension your better off getting new stuff from renault.

Mat.

rctempire

22-11-2010, 18:22

Im After
16v radiator
Rear engine mount (dog bone)
Front discs, front pads?

Clutch cable.

T1MWV

24-11-2010, 21:02

Hi matt,

Im after a complete williams drivers side hub please. Can you help?

Cheers

Tim
07971 050 555

phantome46

25-11-2010, 11:04

Matt - have you got a phase 1 aux fuel pump yet?

Thanks

MatBrown

25-11-2010, 18:16

I have one but its not working, but the pipe connections are all good though so you could swap the motor from yours if it works?

Mat.

JamieG

14-12-2010, 17:25

Mat,

Got car running after speaking to you, appears the pump had got stuck.

How much for a Fuel Pump?

Regards,
Jamie

Geeky

11-01-2011, 14:28

Still after a rust free boot if you get any in, 449 blue a bonus.

MatBrown

11-01-2011, 18:23

Got phase 1 boots but the phase 2's seem to rust more.

Mat.

Geeky

12-01-2011, 12:30

I didn't even realise there was a difference. I'll perhaps check some pics. Will drop you a PM aswell - if a phase one will fit my ph2 williams 2 then I'm happy, the lock mechanism is no longer attached on mine due to crumblization!

jock

13-01-2011, 23:37

Mat, do you happen to have a good plastic brake line cover, that runs under the floor passenger side ? Cheers Jock.

MatBrown

14-01-2011, 17:18

I should think so mate.

Mat.

cliowilliams174

15-01-2011, 15:04

hi do you have an alternator for williams? cheers

MatBrown

15-01-2011, 19:16

No good ones at the mo.

Mat.

quadra28

18-01-2011, 18:38

matt do you have a engine williams f7r 700 ?

ratboyvalver

13-02-2011, 19:44

mat you got an oil level and temperature sensor please :D

ratboyvalver

13-02-2011, 19:51

and a tps sensor :D

jackjz

23-02-2011, 00:09

hi you got any front bumper how much posted st3 3hy

reasonable condition aslong as it fits right and any scratches can be rubbed down and re painted thanks

chip

23-02-2011, 00:33

Got a lock set and a dipstick tube?

MatBrown

23-02-2011, 18:00

Front bumper would need collecting from Hinckley.
Got a lockset but the boot lock doesn't work.
Will have a look for a dipstick tube.

MatBrown

25-02-2011, 23:15

Have got a dipstick tube too.

williams0083

02-04-2011, 15:24

Hi have you got a set of standard springs?
cheers

MatBrown

02-04-2011, 16:25

Yes mate.

Geeky

14-04-2011, 15:33

Hi Matt, am still holding off on a boot, let me know if you still on for sorting one or there's one on ebay I'm going to buy and spray. Cheers.

MatBrown

14-04-2011, 18:36

Sorry mate,
Did get your email but forgot to reply, planning to come up one weekend when i get chance.

ratboyvalver

14-04-2011, 20:00

you got a tps fella?

MatBrown

14-04-2011, 23:04

Yes mate, but only sell them complete with throttle body.

ratboyvalver

15-04-2011, 16:00

cool how much for a tb with the tps fella

Geeky

16-04-2011, 16:11

Sorry mate,
Did get your email but forgot to reply, planning to come up one weekend when i get chance.

That's cool, Still in no rush just was worried you might forget, been a while :)

fani

05-07-2011, 17:43

cams + pulleys from williams or 16v engine ? how much ? thanks.

MatBrown

05-07-2011, 19:24

I have some from a 16v, would have to check postage costs though.

Vandella

16-07-2011, 14:53

Hi Matt, Im After sum rear break callipers for my willy.. any chance u may still have? also a grill from a willy 2? Cheers mate

MatBrown

16-07-2011, 16:36

Got some calipers but out of grilles at the mo.

wavy

16-07-2011, 17:12

im looking for a full lock set with keys and the blip thing on roof ↲Also ignition and anything else needed for ignition to work↲And may need the immob disable lock barrel and key ↲Car is fully locked up and iv got no key or immob fob so hoping changing everything will get it running again ↲Will i need to do more ?↲Cheers dave

westy94

20-07-2011, 15:54

hi have you decat pipe and a suttle back box? (not loud)

MatBrown

20-07-2011, 22:53

MatBrown

20-07-2011, 22:54

hi have you decat pipe and a suttle back box? (not loud)

No de-cat, and i might have a magnex back box.

wavy

21-07-2011, 19:08

wavy

21-07-2011, 19:11

could you check please mat
:)
thanks
dave

westy94

21-07-2011, 21:41

How much for the magnet backbox mate if you do have one delivered

Martin

Tommo

27-09-2011, 17:47

Matt, do you have a rear bumper and how much mate?

MatBrown

27-09-2011, 21:59

Yes mate, but would need collecting.

JonnyGee

28-09-2011, 00:53

would u have a williams arb and mounts ect?
and williams track control arms or full rack please?
cheers

MatBrown

28-09-2011, 16:29

I have an ARB, Wishbones and rack, no driveshafts though.

steveoegan

15-12-2011, 18:12

hello mate, got any willy 2 bootlids? will happily come and collect! cheers mate

FM696269

15-12-2011, 21:07

hey mat

could you do me a pricecheck on these items please mate, just wanna see if its cheaper for me to buy the spares or buy a write off 16v n strip it for what i need or buy a 1.2/1.4 then get 2 recliner bucket seats.

16v seats and rear bench
rear seat belts
interior plastics (A post pieces across to B post, then rear quarter plastics where the speakers are, centre console plastic where the gearstick is)
parcel shelf
boot carpet
tailgate plastic (inner)

cheers mate

MatBrown

16-12-2011, 10:29

hello mate, got any willy 2 bootlids? will happily come and collect! cheers mate

Nothing rust free.

Wobba

16-12-2011, 12:16

Me need Willy 1 drivers side bumpstrips!

MatBrown

16-12-2011, 13:09

Good luck! LoL.

MatBrown

18-04-2012, 19:52

Just a small note, i currently have 5 16v's, 3 Williams, 2 172's and a 182 i'm breaking for spares.
So if you need ANYTHING, there is a good chance i've got it.
Your one-stop clio shop! LoL.

Elaine1983

18-04-2012, 23:50

Hi, im after a steering rack for my Williams 3 if u have one? Thanks

gareth_bowler3

23-04-2012, 19:41

you got a willy 1 boot lid, in ok nick?

Anders

14-06-2012, 10:26

You got the pas pipe that runs down the back of the rad? Mine popped! after rubbingon the fan housing.

MatBrown

14-06-2012, 17:02

There's two different sorts, got a picture?

Coops

14-06-2012, 17:41

passenger side 172 door pull mate to open the door from inside?

mines a phase 1, are they same on phase 2 if thats all you got

MatBrown

14-06-2012, 17:49

The handles are silver on the phase 2.

Coops

14-06-2012, 18:28

no phase 1's? or can u hook me up with set of two phase 2 for right price mr b?? presume same mechanism n fitment?

MatBrown

14-06-2012, 20:08

No phase 1's i'm afraid.
£10 for the pair of phase 2's.

Coops

15-06-2012, 09:10

bring to FCS fella? and defo same fitment on the wire mechanism?

cheers

Ben

morley2212

21-06-2012, 18:17

hey, im after the engine loom out a K reg 1.8 16v.?

Anders

21-06-2012, 18:18

Can barely see the pipe starts/ends, havent taken the car apart yet trying to get the parts before I end up with bits eveywhere and no bits to put back in, I can try and take a pic of it in the car, but thats prob easier said than done. I think its the one that comes off the pump, under the inlet manifold and then drops down the back of the rad and connects to another pipe that goes round the passenger side of the car.

BazEdgar

21-06-2012, 22:08

Hi,
I've just bought a williams 1. It's perfect, except for a missing hub cap. I don't suppose you've any spares?

Thanks
Baz

MatBrown

23-06-2012, 09:26

hey, im after the engine loom out a K reg 1.8 16v.?

Don't think i have any good ones mate.

MatBrown

23-06-2012, 09:27

MatBrown

23-06-2012, 09:27

Hi,
I've just bought a williams 1. It's perfect, except for a missing hub cap. I don't suppose you've any spares?

Thanks
Baz

Yes mate.

BazEdgar

23-06-2012, 14:24

Yes mate.

Brilliant, Whereabouts are you?

Squeak

26-06-2012, 09:55

^ Hinckley

Mat have you got the brake switch that attaches to the brake pedal pleasE?

Anders

27-06-2012, 16:51

The one that comes out the pump is all metal?

Il grab pictures of what I can see. renault have taken a month so far to get me a pipe, and still have no pipe....

MatBrown

01-07-2012, 09:30

Brilliant, Whereabouts are you?

As Dan said, I'm in Hinckley, Leics.
Switch is no problem dan.

zmaster2k

01-07-2012, 11:21

Mat

Need some Rubber!

Specifically, weather strips, door seals, windw rubbers....

what ya got?

Anders

01-07-2012, 13:07

3525

Have you got this pipe?

Also a the red throttle postion sensor? the sleeving on the wiring on mine has perished and is falling off.

MatBrown

01-07-2012, 13:40

The rubber one? Will have a look. Have got a throttle body with TPS attached.

MatBrown

01-07-2012, 13:42

Mat

Need some Rubber!

Specifically, weather strips, door seals, windw rubbers....

what ya got?

PM or text me mate, but some of them might be difficult to post.

Anders

01-07-2012, 17:32

Yeah the rubber one, any idea what you want for it if you have one?

How much for the throttle body? only really need to sensor.

ratboyvalver

29-07-2012, 23:10

williams wishbones and arb :)

MatBrown

31-07-2012, 22:37

Yes mate.

si2001

01-08-2012, 20:21

N/S rear brake caliper?

will_dewis93

05-09-2012, 00:39

Any chance you'd part with a reciever unit for the central locking, if you've got one lying about? (And in awnser to your thaughts. Yes, my sunroof leaked..)

MatBrown

05-09-2012, 07:55

You need a matching pair of receiver and sender.
And I've not got any spare at the mo.

Kris2012

10-11-2012, 15:33

Have you got:

1) The red top cover for the battery terminal
2) N/S/F camber bolt washer.
3) Standard airbox including connecting pipes to replace induction kit.

MatBrown

11-11-2012, 10:20

Got the cover and the airbox.
Camber bolts are not standard though?

Kris2012

11-11-2012, 12:31

Great. Are they good condition? Any chance of some pics?I didn't know about the camber bolts. I'll have to change that!Cheers

Jamie.

12-11-2012, 17:29

I completley forgot about those dash strips - can I pay for them? Do you still have them. Need 2 x dash and steering insert. Standard 182 if you have them

MatBrown

13-11-2012, 00:46

Think I still have some.

Kris2012

26-11-2012, 10:51

I'll take the cover please. Is the airbox faded or in decent condition. I'm looking to tidy up my engine bay.

MatBrown

26-11-2012, 11:07

Air box should come up with some dressing.

anyideas

26-11-2012, 16:22

Matt

Have you got a heat shield for the engine bay?

Vandella

26-11-2012, 18:00

any bumpers in good nick available mat? or what the best way to get the bump strips back to black?

MatBrown

28-11-2012, 23:40

No decent bumpers at the mo, Wurth do a plastic dye though.

Kris2012

29-11-2012, 09:59

Thanks Mat.

I'll take the red battery terminal cover for now then. How much and where shall I send it?

Kris

robi1000

07-01-2013, 22:14

I need oil temp/level sensor and that alu bracket that is bolted on the block (teeth for aux tensioner must be in good condition). I'm also after F7R 714 dip stick.

bil909

25-01-2013, 20:46

Williams gearbox request please

BazEdgar

02-02-2013, 14:16

Hi Matt

I don't suppose you've got a williams passenger door? Thanks to some prick caving mine in overnight and driving off, I could use one

Thanks

MatBrown

02-02-2013, 21:49

Hi mate,
Nothing much good as most of my panels got damaged in the hail storm last year.

riddles

03-02-2013, 11:35

I need replacement front shocks and springs for my williams, have you any of these if so at what price. im based in lecis so collection no problem.
thANKS

bil909

23-02-2013, 11:20

Hi do you have a spare gearbox for a williams?

fasterthanjesus

07-06-2013, 06:29

do you have a rear axle for williams with torsion setup intact? not bent!

Woznaldo

29-06-2013, 02:34

Hi, I'm looking for a Williams front Anti-Roll Bar in decent condition.

I'll be in UK in the next two weeks.

MatBrown

29-06-2013, 09:52

They all have surface rust?

Ste

30-06-2013, 15:33

Hi I am after a few bits if you have them:

door solenoid for passenger door (i assume either will fit),
the plastic cover that fits on the rear wiper arm to hide the nut,
the smoked plastic cover that sits on the roof near the interior lights,
Both door trays (what condition are the ones you have)

Thanks

Ste

SIMONCLIODIMMA

11-07-2013, 20:52

Hi Im looking for the drivers side engine mount for Clio williams /16v (the part that fixes to to chassis with the powersteering bottle) and the full bottom engine /gearbox mount (dog Bone) If you have any can you call me on 07989627736
may want other bits as well.

Cheers
Simon

lewis

24-07-2013, 07:41

Do you have a Williams 3 rear axle with the abs sensors?

jackieoffen

19-08-2013, 13:02

Hi there am in desperate need of a working speedo/clock unit...

mitnik

26-09-2013, 12:43

Do you have the tailgate bootstrip?

MatBrown

27-09-2013, 12:09

Which style?

mitnik

28-09-2013, 09:30

The part number is 7701467225 the one that williams have.

FWilly

11-04-2015, 05:05

Do you cambelt plastic covers?

chayg

11-04-2015, 22:28

hi mat im after a few bits wonder if can help.

clio 1.8 16v bonnet vent [just the external part]
clio 1.8 16v reverse relay [one under glove box]
clio 1.8 16v indicator relay [one under glove box]
clio 1.8 16v map sensor bracket

cheers mate.

glyn211269

12-05-2015, 00:33

Hi Mat, I don't suppose you have any Williams Speedlines at all?? Or anyone else who has a spare set???

chayg

18-05-2015, 14:33

hi managed to get hold of the other stuff, any chance you have a front subframe for a clio 16v mk1 for sale?

cheers,

"is this guy still alive?"

elitesion

07-09-2015, 19:16

I'm after the bump strips for a williams 2.
Hope you can help?

white2lsr

17-01-2016, 14:45

Hi, im after a N/S/R bump strip for a phase one valver if you can help?

jimmy89

19-01-2016, 19:19

Hi do you have a fromt bumper for a clio 182 FF in black gold?

MatBrown

14-06-2016, 00:22

I can be contacted easily on Facebook.
https://m.facebook.com/Clio-Specialist-843705932412754/

Elijah48

31-10-2016, 19:01

Do you have the plugs that go into the coil module please? if not a loom please?

Nickysteveo

15-11-2017, 19:12

Hi
I have a Williams 1.
Have you got any glass for the fog lamp?

Need a gold hub thingy for one of the wheels, it went missing have you got one any idea where I can source one?

cheers
Nick