downhiller_01
26-06-2006, 22:36
Recently perchased a set of Cobra buckets from ebay and want to fit them to my valver. Ive got leather interior atm on reclining subframes or whatever they are, so i unbolted the seat and took it out. However the reclining bit is actually part of the seat and came out too, as did the seat belts and safety tensioner!
all that was left was the runners which were bolted to the floor. However the bucket seats already have these, its the reclining bit i need. plus the mounts on the new buckets were far narrower apart than the ones in the car.
I was aware that i might have to get some different subframes but where do i fit the seatbelts too? im guessing that i'll have to buy some new seat belts.
I went down to halfords and they were stacks of no help, quoted me £80 for the subframes.....EACH! as for the seatbelts they didnt know.
Any help much appreciated.
Cheers
Sam
all that was left was the runners which were bolted to the floor. However the bucket seats already have these, its the reclining bit i need. plus the mounts on the new buckets were far narrower apart than the ones in the car.
I was aware that i might have to get some different subframes but where do i fit the seatbelts too? im guessing that i'll have to buy some new seat belts.
I went down to halfords and they were stacks of no help, quoted me £80 for the subframes.....EACH! as for the seatbelts they didnt know.
Any help much appreciated.
Cheers
Sam