PDA

View Full Version : Kent Cams



donsrno1
19-06-2006, 12:55
I've heard a lot about the pullies failing on these - but are the cams themselves OK usually? It's just as there are some up on ebay at the moment near me going quite cheap.

The other issue is that they are for a williams, but would they be OK in the 1.8 16v?

donsrno1
19-06-2006, 13:03
just ignore this, just found out the cams tend to fail as well so I'm steering well clear.

stew
19-06-2006, 14:36
yep - bingo BANGO!!!! :wink:

ohh and willy cams wont work too well in ur valver i woudlnt have thought. wrong lifts and durations etc etc!

mikeymikewakey
19-06-2006, 15:23
So I should take these Kent Cams off my watch list too? lol

Mike

stan
19-06-2006, 15:44
yep - bingo BANGO!!!! :wink:

ohh and willy cams wont work too well in ur valver i woudlnt have thought. wrong lifts and durations etc etc!


they will work fine in either engine...its the lift and duration change that makes them a performance spec.

Russ-16v
05-11-2006, 11:54
iv heard from a very reliable tuner that willy cams once timed work well in valvers