PDA

View Full Version : Will 16v bumpers fit on a williams?


J_A_R_B
16-06-2006, 12:55
Hi all

Just wondered if 16V front and rear bumpers are the same in design and fitting as the williams bumpers.
Swervin_Mervin
16-06-2006, 14:36
Yes
jez
16-06-2006, 15:53
but they have a yellow strip on the bumper strip bit not a black one
dan-hipgrave
16-06-2006, 16:09
^^I think that depends on the phase mate, as mine are phase 2 16v bumpers and have a black inner strip, not yellow...
jez
16-06-2006, 16:45
ah sorry my apologies :D
Swervin_Mervin
16-06-2006, 17:24
And mine have a silver strip cos it's ph1.
Allan
16-06-2006, 18:45
You the one selling those bumpers on ebay then ???

or just after buying them :)

i was looking and tempted to buy them
J_A_R_B
20-06-2006, 08:14
I bought the ones off ebay and as i thought they are phase one bumpers with silver strip in the middle. Can you remove the strips in the middle or even the whole plastic trim. Plus one of the mounts at the bottom of the front bumper has cracked and come off is there anyway i can get a new mount and re revit it or is it a case of making a custom mount?
Swervin_Mervin
20-06-2006, 10:01
Custom bumper mounts are your friend. I have 2 joist hangers holding mine on at either side. :P
J_A_R_B
20-06-2006, 23:08
Has anybody taken out the metal strips in the middle of the plastic bump strips? If so how do you get them out? If thats not possible can you take the whole plastic bump strip off?

regards

James