NOS Kit

[case]

Nitrous Oxide System. This system is made by leaders in Nitrous systems and all of the components in the kit are high quality. For eaxmple fully braided hoses, not plastic hoses like supplied with other kits.

This is a dry kit and comes with several jets for different increases. 12, 25, 35 and 50 bhp jets. Any jet can be fitted to achieve the desired increase. Other jets can also be bought.

The dry kit works by adding nitrous into the air flow and extra fuel is added by increasing preasure on the fuel regulator.

The kit is very easy to fit and all brackets are currently shaped to fit a 16v/williams.

The kit also comes with complete fitting instructions. and the bottle is roughly 1/3 full.

Delivery is possible but gas will have to be let out of the bottle. If collected i am happy to help the buyer fit the kit.

Looking for around £325 postage is avaliable at £15


http://images.fotopic.net/yep1fb.jpg

[bradus]

out of intrested how much is it to fill up ?

[steveos_16valver]

some thing like £10 max

[case]

really depends on where you fill it up. If you use one of the companies out of max power or somewhere they charge £1 a pound and so it's about £40 but nitrious oxide is used loads of places, for example dentists. You can find out where you local dentist or hospital or anywhere gets theres from and it'll be really cheap.

[ajketley]

Oh do I wish I had the money :wink:

I was going to look at kits towards the end of summer!

[bill.]

had 50 bhp nos on my valver, worked a treat :twisted:

[wazza16v]

would this buggar my engine if i had this on my valver ?

doesnt bugger anything

Your generall safe to run half the bhp of the standard engine output.

So for a valver 50bhp are perfect, could probs even run 75bhp jets with a controlller

My mate has it on his VTS saxo, its so quick

Good luck with the sale