Magnex s/s Exhaust..argghhh!!!

[Mish_16V]

I have a full stainless steel system w/cat from Magnex for the Valver.

The centre section, as far as i can tell, has started blowing. Only probs is can you buy these seperate from magnex. Obviously de-cat would be the way to go but I still need something for the MOT and I can't go standard as surely the diameter would be to small to match up to the magnex parts yes?

Any help please lads?!

Ta
Mish

[Justin..]

erm, get it welded :?

[VIPERONE]

http://www.weldingengineer.com/images/tig%20welder%2003.jpg

[Mish_16V]

erm that had crossed my mind...but I'd rather not keep welding over something so I was asking if you can get new centre sections or if magnex etc only sell the systems complete??

[VIPERONE]

http://www.powerflow.uk.com/images/pflogo.gif

[Mish_16V]

cheers for the pictures. You could of just put weld it or get a custom one made, but ta anyways :wink:

[stew]

this happened to mine. i was feeling flush, so bought a whole new devil system! :twisted:

ive still got the centre section with its blowing middle section on the silencer.

poor design i reckon.

[white16valver]

Mine seems to be blowing too :?

Anywhere recommended for welding?

[seanofnp]

if its a 1995 ph2 valver chances are you wont need your cat for your MOT.

Mine didnt last week. Passed with Full Magnex S/S Exhaust system with de-cat. :)

[Justin..]

you need a cat for any car newer than 1992 most of the time :?

[Itsme]

My williams had mot yesterday and passed with de cat dont no how even mot tester couldnt explain why but its done on computer and computer seamed to be happy with it saved me hassle

[Justin..]

i think if theyre really hot theyre good on emissions

[clowo16v]

I made my own centre section, not paying the comedy prices for a devil/powerflow one lol.

Matt

[Itsme]

Yeah it went down behind shell garage in woolston for mot and emissions came out at just 0.8 maximum was 3.0 so that must be good want hot though

[Justin..]

blimey thats good !

[seanofnp]

Its not so much emissions, I think its just some cars coz of the new system just dont actually NEED the cat, wether the emissions are good or not.

[Amirclio]

I has this problem,
took a trip to the local powerflow had the centre box cut out and replaced with straight pipe!
set me back 40sheets

Amir

[smokey]

Get in touch with magnex.

Dot they have a lifetime garuntee?

[white16valver]

I believe it's one of these "not transferable if you buy it secondhand" ones. :roll:

Personally, my paperwork wasn't stamped anyway, so I'll have to find a place that does welding. Mine's not terrible but I don't think it's having a positive effect on the power... :?