PDA

View Full Version : Magnex backbox, valver/Williams



Winston
09-06-2006, 01:30
http://i2.photobucket.com/albums/y1/Winston16V/PICT0163.jpg

£50

cheers
Winston

samboRT
10-06-2006, 19:05
will this fit a mk1 RT?

heard it might be able to... thanks

stew
10-06-2006, 19:18
yes it will fit. i put one on my mates 1.2 clio (one of my old cars) and it sounds good!

bumper possibly needs cut very slightly tho. cant remember!

samboRT
10-06-2006, 19:31
ahhh right just reading on another thread, apparently it said the flanges and bore are different on the valver/williams to the mk1 1.4?

stew
10-06-2006, 19:50
but if its just the backbox it should be ok!

but perhaps the bore will be different. iirc i put a 16v system on my 1.2 clio, then the backbox on that, so no wonder it fitted ok! :oops:

jwarren2k2
10-06-2006, 21:26
ive got a powerflow system and dont like the backbox, do u know if this will go onto the system, i think its a 1.75"/2" bore?? was on car when i bought it.

James

jwarren2k2
11-06-2006, 22:24
???

bradus
12-06-2006, 00:56
will this fit a clio mk1 1.2

summeh
12-06-2006, 10:06
is that a 3.5" inward rolled?

bass_direct
12-06-2006, 10:41
looks more of a 4" outwardly rolled...

Clio_GTT
12-06-2006, 12:40
is that a 3.5" inward rolled?

yes it is

Winston
13-06-2006, 16:15
3.5" inward roll ...nice subtle exhaust

samboRT
15-06-2006, 10:12
hmmm, do like this and could really do with knowing if it would fit my rt...

any help? :D

Winston
16-06-2006, 01:36
won't fit your RT unless you use a valver middle section....RT's have a smaller bore cat back