PDA

View Full Version : front brake setup wilwoods?



fasterthanjesus
08-06-2006, 15:07
im going to spend some pennies on new setup for front disks/pads/callipers etc.

anybody advise me on what i should be buying (wilwood) ??

basically for fast road use, and very occasional track.

if anybody has a better solution than wilwoods, im all ears.

cheers.

ftj

northy
08-06-2006, 15:10
hispec are very good - but if i was doing it again i would do it as the works rally cars did.

Large AP racing calipers - with bells and massive disks.

Check out hill powers 6 pot tarrox conversion !

Martin
08-06-2006, 15:17
I'm after yozzasports 4pot (wilwood) setup....400 notes for willwoods, braided hoses, pads, brackets/bolts etc & fluid. 8)

fasterthanjesus
08-06-2006, 17:56
cant see wilwood 4 pot on yozza sport : (

richy
08-06-2006, 18:33
u need to ring them up mate, never had a problem with my wilwoods as yet, done a few trackdays and back road use too

mine are wilwood dynalites(forged), running std size discs, braided hoses and poly E pads,

i think gaz/zollo and a few others run these too

stew
08-06-2006, 21:30
I'm after yozzasports 4pot (wilwood) setup....400 notes for willwoods, braided hoses, pads, brackets/bolts etc & fluid. 8)

me 2! :twisted:

Daz.
08-06-2006, 21:35
I'm after yozzasports 4pot (wilwood) setup....400 notes for willwoods, braided hoses, pads, brackets/bolts etc & fluid. 8)

me 2! :twisted:

me three!!!

Although my max budget was around £300 and that was with fitting :?

So I could squeeze to £400 but I'd need a freebie fitting...