Adi82
05-06-2006, 23:40
Ok im a little confused and just wanted to check i was assembling my coilovers correctly so i can have a go at fitting them tomorrow. There H&R coilovers and are going on to my williams. I bought a new top mount kit from renault and have just had a go at putting them together. So is this correct?
General layout
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0585.jpg
Top of spring and spring plate
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0591.jpg
Next the bearing is placed on top
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0592.jpg
Followed by the mounting rubber
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0593.jpg
The strut is then installed and the top rubber mount is screwed down from under the bonnet
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0594.jpg
Is there anything missing?
I also have two nuts that can be seen in the first picture one came with the coilovers and one with the top mount kit from renault. Do i need both? where exactly do they go?
Thanks adi
General layout
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0585.jpg
Top of spring and spring plate
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0591.jpg
Next the bearing is placed on top
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0592.jpg
Followed by the mounting rubber
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0593.jpg
The strut is then installed and the top rubber mount is screwed down from under the bonnet
http://i3.photobucket.com/albums/y76/ajr83rt/williams/CIMG0594.jpg
Is there anything missing?
I also have two nuts that can be seen in the first picture one came with the coilovers and one with the top mount kit from renault. Do i need both? where exactly do they go?
Thanks adi