View Full Version : Roughly what top end speeds and 0-60 times do you get?
seanofnp
04-06-2006, 15:15
In my valver, with full interior and full ICE (two 12" subs n boxes + amp) in the boot, spare wheel on and 17"s rims i got about 7.4 0-60 and I kept topping out at like 120. But my car is in serious need of a service and i have willy wheels ready to be put on when i re-insure myself on it.
What roughly do you all get?
I have full Magnex S/S system with de-cat. And K&N 57i induction kit.
bass_direct
04-06-2006, 17:15
About 7.2 seconds, with spare wheel, 2 heavy toolboxes in the boot...easily gets to 140 on the clocks :shock: clocks must be wrong lol
145mph gps verified, speedo wasnt working.
0-60 5.8
bass_direct
04-06-2006, 17:40
But midge's car isn't allowed lol, it's FAST!
off the clock...5.6 to 60
towing a trailer+car, with toolbox in boot and running 18" wheels and 4star fuel, 160mph and 0-60 in 3.2 sec :lol:
seanofnp
04-06-2006, 18:17
16v forum? Williams and Hybrids not allowed, buzz off nebs! :)
off the clock prob over 150 and around 5 secs. to be confirmed if my head ever returns.
16v forum? Williams and Hybrids not allowed, buzz off nebs! :)
in that case can u make sure u ONLY post in this forum section :wink: 16v only, rest is williams and hybrids :wink: :P
seanofnp
04-06-2006, 19:43
DOH, punk! lol :) just kiddin mate lets not be too hasty now pls pls pls :S :D
145mph and i rekon bout 7 dead but not sure cuz neva timed it!
full 19 f7p engine, decat, itg panel and airfeed to front bumper on 15's oh and smoother bonnet, u wudnt believe how bad for aerodynamics that diamond badge is! :wink:
Laine_16v
04-06-2006, 19:58
Ive taken mine to 130mph on the clocks, ran out of road then, it had more in it.
Havent time 0 - 60's.
Andyvalver
04-06-2006, 20:11
Best ive had out of a gtexh was about 7.2 but average was 7.5 tbh and ive taken it to just over 130.
0-60 high fives.. and i can hit the limiter in fifth v easy at just past 150
Not a clue lol...
Might invest in a timer m'bober
5.2 0-60...never done a flat out run but I imagine limiter in 5th at around 150
Andyvalver
04-06-2006, 23:58
5.2 0-60...never done a flat out run but I imagine limiter in 5th at around 150
Doubt it mate, aint your engine ****ed lol
VIPERONE
05-06-2006, 00:06
Off the clock in 5th gear @ 4000 k...
0-60 havent got aclue
ive only ever done one timed 0-100, 100 took 18 secs and 60 was high 6's. mine was std at the time
5.2 0-60...never done a flat out run but I imagine limiter in 5th at around 150
Doubt it mate, aint your engine f**ked lol
soon my young padawan..it will return !
Mine has been over 130+ so give or take speedo error i would say a genuine book 130mph
0-60 ?? dunno wotever theyre supposed to do it in 7.7 ?
0 - 60 7 seconds for me on my only timed attempt.
seen a similar car to mine do it in the mid 6's.
Amirclio
06-06-2006, 17:04
Ran 7.8 fully loaded car amps subs seats etc at modified nationals at the weekend. Chipped, Magnex ful system with decat, 145mph still had some pull in it just got a bit scared :oops:
lol
Im desperate to make it quicker, got cams and gas flowed head in the shed to be fitted!
NEED TO GET IT DONE!
off the clock prob over 150 and around 5 secs. to be confirmed if my head ever returns.
mines pretty much the same....
S.Wales NA v.s Turbs clio dabble coming on i think!! :lol:
Eckascliovalver
06-06-2006, 18:10
been told my 0-60 was 6.7secs
and had it to 141 ish :oops: well thats a lie the guy that had it before done it,im tooo scared rite now,ive never gripped onto the seat like that before lol!
ecv
Had 115Mph out of the Valver so far but the wheels are unbalanced and it was shaking my arms to pieces so I eased off lol. She defo has more in her, but I'm not really interested in speeds over 100Mph to be honest.
0-60, never tried. I do know however that it's quicker than my mates modded Mk2 Golf Gti 8v which can do it in 7.5 and the Clio was at least a car length in front. So I'm thinking <or=7.5 seconds.
My valver is completely standard, with 60.000 km's (37.500 miles) on the clock. I had it showing a bit over 230 km/h, thats about 145 mph.
I don't know about the 0-60, but as it is standard is guess it to be around the mid 7's..
Dennis
think we need to set up a 0 - 60 day sometime this year - give everyone a chance to see what times they are running !
think we need to set up a 0 - 60 day sometime this year - give everyone a chance to see what times they are running !
And prove the ones they've quoted!!
think we need to set up a 0 - 60 day sometime this year - give everyone a chance to see what times they are running !
And prove the ones they've quoted!!
some are already proven... :wink:
Dancliovalver
07-06-2006, 19:47
ive not managed to do a 0-60 but with a run up i jussst push 150mph on the clocks.
i'd be up for a 0-60 day, my 5.8 was recored at FCS.
seanofnp
08-06-2006, 13:33
Do the lads with 16vs and only breathing mods pull in 5th hard to the likes of 150? Mines so slow even pulling from 120 to like 135.
my old valver pulled hard till about 120 - then it hit a wall lol nothing happens fast after that - got it to 135 downhill once but even that took a while
Dancliovalver
08-06-2006, 17:35
Do the lads with 16vs and only breathing mods pull in 5th hard to the likes of 150? Mines so slow even pulling from 120 to like 135.
i think it depends what sort of mods u have
mine pulls really really well up to 140mph then it struggles to 150, i have to have a massive strech of road to get 150mph
midge id love to compare my car to urs, i think we both have near enuf the same spec cars...................i feel a pod meet comin on :wink:
0-60 in 5.8? what spec is urs n midges cars dan mate? cuz thats quick! :twisted:
Dancliovalver
08-06-2006, 18:13
ive got the modified cylinder head from hillpower, but i dont think mine will accelerate as fast as midges though coz mines set for top end performance!!
so thats hill power stage 1 kit? cams pullies timing and superchip?
bass_direct
08-06-2006, 18:56
midge has got valver head and megane bottom end!
Dancliovalver
08-06-2006, 19:02
so thats hill power stage 1 kit? cams pullies timing and superchip?
Yeah port, polished and gas flowed with stage 2 hillpower chip an 7.7k limiter
how much did u pay for that lot mate or was it already done? am gettin ideas now!! :twisted:
I carried out the work on Midges....it has a ported 1.8 head with 270deg piper cams, on a megane 2.0 F7R bottom end. Also has a supersprint exhst manifold, and mapped eprom by chipwizards.
thats the kinda spec am lookin at for the end of the year, how much of a dent to his wallet did it make stan if you dont mind me askin?!
Dancliovalver
09-06-2006, 07:51
I carried out the work on Midges....it has a ported 1.8 head with 270deg piper cams, on a megane 2.0 F7R bottom end. Also has a supersprint exhst manifold, and mapped eprom by chipwizards.
thats awsome, ive got my bottom end to go on aswell so we should be pretty equal!!
coops- ma missus brother had it all done at hillpower, i think he payed somewhere in the region of 1500 sniffs but it did make a big difference!
143mph and still creeping up, and 6.45 to sixty according to the questionable measuring of a G-tech thingy. :)
Swervin_Mervin
09-06-2006, 10:52
I've hit 120 in 4th and slowly crept to an indicated 135 and then stopped accelerating at 5k rpm. The mrs then steamed past in the Xsara. :(
i hve yet to get my valver past 110
it can do it, cuz i can feel her pulling. i just aint got the balls :D
Or 179mph, on my (apparently rather healthy!) GSXR600 :P
midges also has lighten/balanced bottom end.
clioturbo_1
09-06-2006, 19:11
not sure on my 0-60 or top speed.
estimate:
0-60 mid 5
top speed:140
thats the kinda spec am lookin at for the end of the year, how much of a dent to his wallet did it make stan if you dont mind me askin?!
I paid less than half of what gdi and hillpower quoated me, and as can be seen by the figures the work is off no less quality to that of the more expensive tuning companys.
seanofnp - my car pulls right up to the limiter in 5th
Stan + chipwizards - HIGHLY recomended
Andyvalver
12-06-2006, 15:16
5.2 0-60...never done a flat out run but I imagine limiter in 5th at around 150
Doubt it mate, aint your engine f**ked lol
soon my young padawan..it will return !
8) Hope so mate.
adiclio16v
17-06-2006, 17:34
a clio with a 16v gearbox an a chip with raised rev limit will hit about 145 before hittin the rev limiter in 5th if its got enough power, with a willy box ull get a bit more prob 150 on the clocks
adi
my hybird has been up to 142mph indicated. i reckon it will do 145mph or just a sniff under 150mph indicated.
thats me running the valver jb3 box!
cams, headwork and remap coming shortly! :wink:
Dancliovalver
17-06-2006, 17:42
my hybird has been up to 142mph indicated. i reckon it will do 145mph or just a sniff under 150mph indicated.
thats me running the valver jb3 box!
cams, headwork and remap coming shortly! :wink:
u wont regret the head work mate, great fun
where u havin it done???
downhiller_01
18-06-2006, 21:35
7secs to 60,hits the limiter at 135mph....
Sam
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.