PDA

View Full Version : Fogs and Probs <---- D'ya Geddit?!?!


Daz.
02-06-2006, 23:12
I don't get this so give me a clue....

Brand new fogs so can't be that, brand new bulbs, checked the fuse in the engine bay ok, checked the interior switch, thats fine, the fact the light comes on in the dash shows somethings working...

So why no light?!? lol

Not even from one or the other just naffink!
stew
02-06-2006, 23:14
i had same problem. i ripped the mofo's out, and put cold air feeds in! :wink:
Daz.
02-06-2006, 23:17
lol - like your thinking but i'm staying standard...

I'm not a chav but I feel better knowing they're there... begging to be switched on and blind people on that sacred ground known as macdonalds car park... :D
MatBrown
02-06-2006, 23:19
The plug where the looms connect by the carbon cannister?



Mat.
Daz.
02-06-2006, 23:20
Hmmm good point i'll have a look.....
































Whats a carbon canister?
Justin..
02-06-2006, 23:30
lol, they need to work if installed for mot aswell . carbon canister is behind the driver side wheel behind the bumper
Daz.
02-06-2006, 23:32
Really? well it passed last month with them not working :shock:

Can I get to it just taking the fog out again or do I have to remove a load of shit?
Justin..
02-06-2006, 23:33
Wtf my rt failed cos a foglight wasnt working :roll:

Oh and thanks for the Gearknob :D
richy
02-06-2006, 23:35
need to check the plug on the o/s for the loom, they get water etc in them and it mess's the connections up!
Daz.
02-06-2006, 23:35
Oh yay! :wink:
MatBrown
02-06-2006, 23:37
Front foglights are not part of the MOT but a working rear fog is necessary.



Mat.
Daz.
02-06-2006, 23:38
^^^ The mans a Legend 8)

Can you answer my question if you know mat? can I get to the loom plug just by taking the fog out?
Daz.
03-06-2006, 01:20
A nearly 2 hour bump!
MAXIBOY
03-06-2006, 01:34
think you have to remove the arch liner
MatBrown
03-06-2006, 09:24
^^^ The mans a Legend 8)

Can you answer my question if you know mat? can I get to the loom plug just by taking the fog out?

Think you can actually, depends if it's clipped to the body properly, Try it first but you might have to take the wheel and arch liner off.



Mat.
lee
03-06-2006, 09:34
Lol ive only got one fog atm...but thats down to the wiring going into the alternator belt, and even tho it screwed the alternator belt..it came better off than the fog wiring :lol:

Bin the scrappy and got new wiring...just havent fitted it yet cus cnt work out what connecters have been ripped out of where
summeh
03-06-2006, 23:13
fogs don't work unless sidelights are turned on :wink:
Daz.
04-06-2006, 11:12
fogs don't work unless sidelights are turned on :wink:

Oi! :wink: