PDA

View Full Version : A must for any mk1 RSi owners



BIG D
29-05-2006, 11:45
For sale ported Head,inlet and exhaust manifold. The manifolds have been ground out along with the ports in the head and are now alot bigger than the standard ports, I used a original gasket to get the correct dimentions.The exhasut manifold has also been seem welded to strengthen it as the original join has been ground away.

The head also has 8 new valves which have all been lapped in by myself, i will be fitting 8 new valve stem seals and reshiming the buckets before its sold. The head was faced be my local engineering firm, who have done a great job on it.

Originally planned to be fitted the rebuilt bottom end, thats half done, new big end bearings, new main bearings,thrust washers new piston rings, water pump and fully painted.But after a recent insident with a high high kurb i am now selling all the bits i had planned to go on this car.

Offers around £150 for the head and manifolds or £300 for the head and bottom end as they are.....

Thanks for reading.

D