PDA

View Full Version : Dis-assambling a turbo


kj16v
26-05-2006, 00:34
I'm trying to remove the turbine housing from my T25.

According to a guide I found, you unscrew the turbine bolts until they butt up against the castings on the centre housing and then you keep turning until they push the turbine housing off of the centre housing.

Problem is only two bolts touch anything, so when the housing starts to snag on the turbine, I can't adjust it back.

Anyone know a better way to do it?
kj16v
26-05-2006, 12:53
Anybody? No?

Dust. Anybody? No?

Anybody? No?

Dust. Anybody? No? etc...
Justin..
26-05-2006, 13:05
a large hammer and a new turbo :D
kj16v
26-05-2006, 20:01
Aw! got me all excited when I saw I had a reply. Darn you, darn you to heck!
Justin..
26-05-2006, 20:01
:lol: sorry dude :)
wavy
26-05-2006, 21:22
did ya heart jump thinkin u had a help ful reply :)

Anybody? No?

Dust. Anybody? No?

Anybody? No?

Dust. Anybody? No?
lol :P
arj256
26-05-2006, 23:44
Dunno if this is of any use:
http://www.retro-renault.com/kb.php?mode=article&k=44&sid=7ce1bfe623957bf48dd01f609250e23f

Worth joining up on Retro, as there some good info on there, and some interesting projects to read.
Clio_GTT
27-05-2006, 00:46
can't u just take the big circlip off ?
steveos_16valver
27-05-2006, 13:10
good answer DONT i can probally gurantee it will leak when you put it back on !!!!! get a new 1 or get some 1 to recon it professionally wouldnt recommend doing it your self

reason
1 of the guys did this at work and some thing happened and it leaked hot exhaust gasses and ****ed the turbo and the exhaust due to excess heat blowing throught a small hole