PDA

View Full Version : How can i find a rubber bung for the rear wiper hole????



stew
11-05-2006, 10:03
Seriously thinking about taking out the rear wiper this weekend, but dont wanna be left with the rubber bit sticking out, like someones broken it off! Is there any way/place i can get a rubber bung for it so it sits flush with the tailgate??

Cheers,
stew 8)

rt_blackpool
11-05-2006, 10:07
dont know about a bung, but would some body filer not do it?

smooth it over and spray :)

Dno194
11-05-2006, 10:12
If you are just after a rubber grommit, you can pick one up from a local auto store for about 10p. I would probably put a little sealant of some sort around it to prevent any water getting under it and sitting there which may cause rust though.

northy
11-05-2006, 10:17
what size bung do u need mate ?

we use RS components for all our stuff at home and work.

http://img-europe.electrocomponents.com/images/R605649-91.jpg

Dan_mk1
11-05-2006, 10:53
Get it fillered and smoothed IMO
Bungs look just as wank as a bolt sticking out imo

Lunner
11-05-2006, 20:15
if its a ph2 you can't get a bung as its an egg shaped ghole, i took the wiper out and masticed up the hole in teh rubber bung

Clio_GTT
12-05-2006, 10:52
its a phase 1 and halfords sell a bung thats perfect for the wiper and the spray nozzle :D

BRUN
12-05-2006, 10:57
Motor World sell those rubber blanking grommets

stew
12-05-2006, 12:04
ok cheers guys! is the spray nozzle on the phase 1's a circular hole as well?

havent taken it out yet!

Clio_GTT
12-05-2006, 12:05
ok cheers guys! is the spray nozzle on the phase 1's a circular hole as well?

havent taken it out yet!

from memory yes