Various Valver Parts

[matty]

Finally getting my 2 litre engine fitted 1st weekend in June so the following will be available:

What is left of the 1.8 engine ie not required for the 2.0. This should be BE, Head inc Cams and Pulleys and Clutch. Clutch is a Valeo 30k old. Engine currently on 115k. Cambelt was changed at 72k and always changed oil every 6k and used additives for oil flush and petrol system cleaning.

Valver Starter Motor. Not needed as 2.0 will have its own starter.

BBPT Chip for 1.8 engine. Cost was £237 plus VAT I think, still have invoice somewhere. This won't be needed as will be seeing Chipwizard to get the 2.0 running right.

So all this will be available in a month's time if anything is of use to anyone.

Offers.

[clowo16v]

Where you based mate? £50 for the bottom end.

Matt

[bass_direct]

What pulleys are they mate?

[matty]

Everything on the engine is standard.

Bottom end sold awaiting payment etc

but Clutch only done 30k and is proper Valeo one so if anyone wants a nearly new clutch for a clio. Note to anyone using a Megane BE that the Megane clutch is a different size so you have to fit a clio clutch.

Complete 1.8 head with sandard valves, cams and pulleys.

All available in 1 month after new engine fitted so cannot supply until then and don't expect payment until stuff is available but if anyone wants to secure with deposit or payment that is fine.

BBPT Chip still available, more responsive and raised limiter !!!! Made 148bhp using this with BMC CDA and Magnex inc decat. No longer available at BBPT it seems now they have gone to using R Tuner.

[matty]

And starter motor still available.