View Full Version : Small Update
Was a dry day yesterday so decided to colour code some bits and give it a good wash, wax, tyre clean and dressing.
So far ive coded the bump strips, scuttle panel and the engine mount cover. Still to do are the spoiler, door handles, boot lock and Mirror surrounds.
Here are some pics
http://www.zen32679.zen.co.uk/Clio/Coding/01010008.JPG
http://www.zen32679.zen.co.uk/Clio/Coding/01010010.JPG
http://www.zen32679.zen.co.uk/Clio/Coding/01010011.JPG
http://www.zen32679.zen.co.uk/Clio/Coding/01010006.JPG
Should be lowered next week if my suspension ever arrives :x
looks sweet, but really need to loose the tractor look. :wink:
will look the mutts nuts when lowered dude
but v nice lookin rsi there :D
Andyvalver
27-04-2006, 13:09
slam it and it will look really good 8)
Laine_16v
27-04-2006, 13:19
Champiro budget tyres for the win!! :lol: (yes i have them too :P )
how did u do the colour coding mate? i ruffed up the scuttle/mirrors/bump strips/door handles with wet n dry then 2 layers of primer 3 of paint n 3 of laquer and the buggers have started flaking already! :evil:
Wet and dry to key the surface
Dried and primed with 2 coats
2 Coats of Paint
2 Coats of Laquer
Mine had never been treated with any colouring before the painting, if they have had back to black etc.. on them then the grease will make the paint flake off.
Suspension has just arrived...
Scott-16v!
27-04-2006, 15:00
looking good matey 8)
As it was a nice day i thought i might aswell get it lowered. So started and removed the front wheels...
Old Standard Struts/Springs
http://www.zen32679.zen.co.uk/Clio/Lowering/01010001.JPG
Got the bolts undone, and undid the spring and removed the top mount with the spring compressors
http://www.zen32679.zen.co.uk/Clio/Lowering/01010002.JPG
New 35mm 16v Springs which should lower my car 55mm :)
http://www.zen32679.zen.co.uk/Clio/Lowering/01010003.JPG
All fitted back up tightly and in place, struts are Gaz Adjustable ones.
http://www.zen32679.zen.co.uk/Clio/Lowering/01010004.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/01010005.JPG
Same thing on the passenger side, the old stuff removed and new stuff on, its a good job the new stuff arrived as when i was compressing the spring the old one snapped :shock:
Also the passenger side was more of a pain, the strut sat a bit lower than the joint which meant a lot of swearing but eventually sorted.
http://www.zen32679.zen.co.uk/Clio/Lowering/01010006.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/01010007.JPG
Start the rear, thought i can get the shocks on and possibly get the torsion bar done.
Old stuff, with really tight bolts which took ages to remove but minutes to refit.
http://www.zen32679.zen.co.uk/Clio/Lowering/01010009.JPG
New stuff (pics blurry as it was dusk and i thought it would be ok but not enough light)
http://www.zen32679.zen.co.uk/Clio/Lowering/01010010.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/01010011.JPG
Adjustable screws, should be able to adjust the damping without even removing the road wheels
http://www.zen32679.zen.co.uk/Clio/Lowering/01010012.JPG
My efforts are rewarded for the current lowness at the front...
http://www.zen32679.zen.co.uk/Clio/Lowering/01010016.JPG
Looks slightly high as the rear is on Axle stands and it has to settle down...
More to follow 2morro as ive still got to remove the torsion bar and lower that. I have to remove the skirts on my RSi as they get in the way :(
Scott-16v!
27-04-2006, 21:26
nice days work mate, can't wait to see it finished 8)
Right then, finished it today after a lot of trouble.
Better picture of the rear shocks
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010018.JPG
Torsion bar removed
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010019.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010020.JPG
First off i lowered it 60mm roughly which i thought would be fine however... No, it scrubbed like a cunt.
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010021.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010023.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010024.JPG
So because of this i had to raise it slightly, now lowered about 40mm ish...
Whilst doing this another present arrived, my french plates which were put on quick sharp!
Fin
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010030.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010031.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010032.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010033.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010034.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010035.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010036.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010037.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010038.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010039.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010040.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010041.JPG
http://www.zen32679.zen.co.uk/Clio/Lowering/Fin/01010042.JPG
Im really happy with the results, the back could go a litle lower but for now its fine. Its currently set on the Hardest setting which so far seems softer than my Nova when that was lowered.
:D
Scott-16v!
28-04-2006, 16:27
:o looks soooooo much better matey, you've done a top job on that. plates look great too 8)
looks superb mate!very tidily done! 8)
Justin..
28-04-2006, 16:41
nice one, bout time you slammed it 8)
Andyvalver
28-04-2006, 16:56
8) looks so much better now mate. nice one \:D/
Wahoo, at last! Looks really nice now mate, top effort 8)
Definately wouldn't lower it any more on the back though :?
Looking good. much better now its lowered.
I am liking those french plates just needs some yellow fogs to break it up :wink:
With all the black, thought about painting the calipers?
clowo16v
28-04-2006, 17:26
That looks 100 times better now its lowered well done.
Matt
expect the bushes on those GAZ rear shocks to fail within a year, mine did on both sides
I've got to say it's looking very, very nice love it... 8)
gotta say i like it alot, all u need now is a red moving light under the grill and u have french version off KITT :D
U dont mess about do u mate, must admit your car..looks good.. almost looks like a valver :wink:
seriously it looks sweet :) good job 8)
No time to mess around LoL - want it as finished as i can get it for FCS :)
LoL at the Kitt idea, shame it doesnt talk tho :cry:
BRUN - if they go ill complain like a wanker to the bloke who sold them too me as they have a 2 year warrenty :wink:
Possibly paint the calipers, wouldnt do anything mental tho. Maybe Silver :roll: :lol:
Thanks for all the comments
Im really happy with it which makes a change
Lookin' good mate. Looks like my valver! Since it's an RSI, ever thought of dropping in a Volvo turbo engine? I checked one out recently, which unfortunately had a boost problem. It's was pretty rapid - until it started kangarooing!
Lightly tuned would defo give your car some meat to go with that garnish! :)
Mater had one, and tbh over teh std RSi, drag race off the lights, stripped RSi one up, so weight was same pretty much he was only about half a car length ahead at end of 2nd and about 2 car lengths ahead at end of 3rd
Lookin' good mate. Looks like my valver! Since it's an RSI, ever thought of dropping in a Volvo turbo engine? I checked one out recently, which unfortunately had a boost problem. It's was pretty rapid - until it started kangarooing!
Lightly tuned would defo give your car some meat to go with that garnish! :)
Thought about it, might look into it more after FCS
titch16v
29-04-2006, 20:40
looks really smart mate
looks good mate. Any scrubbage on the fronts at full lock?
small amounts, i took the rear shit guards off as it scrubbed on them.
Fitted my new Green Hoses today, next thing on the list is a strut brace which fits, rocker cover and possibly inlet manifold polishing, would like some chrome top mounts but there pricey, same as a header tank.
But for now it will be fine.
http://www.zen32679.zen.co.uk/Clio/Engine/Hose/01010057.JPG
http://www.zen32679.zen.co.uk/Clio/Engine/Hose/01010058.JPG
http://www.zen32679.zen.co.uk/Clio/Engine/Hose/01010059.JPG
http://www.zen32679.zen.co.uk/Clio/Engine/Hose/01010060.JPG
http://www.zen32679.zen.co.uk/Clio/Engine/Hose/01010061.JPG
http://www.zen32679.zen.co.uk/Clio/Engine/Hose/01010062.JPG
http://www.zen32679.zen.co.uk/Clio/Engine/Hose/01010063.JPG
Also needs a clean :lol:
Scott-16v!
05-05-2006, 14:45
dirty bitch, looks smart matey 8)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.