View Full Version : Rear Beam on Axle Stands
Swervin_Mervin
18-04-2006, 16:21
Is there anywhere I can put the axle stands so that it loads up the rear suspension but I can still remove the wheels?
I can't get access to any ramps this week but want to bleed me brakes (see other thread).
you could make a jig up to compress the torsion bar that bolts to the wheel and you turn a nut on a threaded bar to load it ?
could you jack the car up as high as you could go - then lower it slightly onto some blocks of wood (keeping the wheel on)
then u should be able to get under it quiet easily ???
Swervin_Mervin
18-04-2006, 16:57
Might have to try that Northy. Got lots of spare wood and bits of coping stone.
yeah but then u have to do both front and rear too....
Swervin_Mervin
18-04-2006, 17:40
Doh.
Will see if I can get to it with the car on the ground. Chris on F7 said to tie the bias valve open while I bleed it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.