wheels

[dannyb1986]

ive got a chance to buy some wheels, off of a 106 gti, would they fit straight on the 16v? they were fited with spacers on the 106, so will i ned the spacers?

[Winston]

The PCD is different (stud pattern)

And the offset is way to low as well

PCD 4x100
ET 36 ish ...(give or take abit each way)

[dannyb1986]

i dont know if there universal fit, they have the 8 tud holes instead of 4, and what will matter if the offset is different? will they just not go on

[BRUN]

they will more than likely be a 38 offset and have been fitted to the 106 with spacers cos they were needed

find out the offset and what PCD the other set of holes are

what wheels are they ?

[dannyb1986]

they are OZ titans

[Lunner]

Nice choice 8)

www.lunner.co.uk/rsi

[dannyb1986]

that link doesnt work, have you got titans aswell? £80 with 2 brand new toyo proxes!

[Lunner]

http://www.lunner.co.uk/RSi/index.html

Did have, sold them with the car, was sick and tired of them

[dannyb1986]

the offset is ET37, is that good or bad?

[dannyb1986]

any help guys, the stud pattern matches up and there offset ET37, is this ok or will they not go on?

[big hp]

any help guys, the stud pattern matches up and there offset ET37, is this ok or will they not go on?


They'll fit then.