View Full Version : Stripped
clowo16v
04-04-2006, 13:12
Not got round to cutting anything out yet as the weathers been shite so I cant do the bodywork. I've taken some pics of everything unbolted though. I'll have to leave the dash in until I fit the throttle bodies as when I do i'm gonna rewire the car to get rid of the massive standard loom.
The seats are staying for the time been but i'm gonna fit a single bucket seat for racing.
Matt
clowo16v
04-04-2006, 13:19
Its not too bad lol I don't really care though. Should be a lot louder once i've got my new exhaust on. Rattles more now though with everything out, the windows rattle loads in the doors which I didn't notice before.
See ya
Matt
Are you seriously not using a gearknob?
Madness
clowo16v
04-04-2006, 17:12
Yeh it weighs too much :lol:
Not really lol, my Momo knob fell off and I can't be arsed payin £20 for a standard one as theres no benifit lol.
See ya
Matt
ash clio gtt
04-04-2006, 17:20
get it on a weigh bridge see if you can beat me :lol:
clowo16v
04-04-2006, 17:37
I'm gonna take it on once the bootlid and doors are stripped out and i've drilled the shell. Not sure how light it'll be yet.
See ya
Matt
clowo16v
04-04-2006, 17:37
I'm gonna take it on once the bootlid and doors are stripped out and i've drilled the shell. Not sure how light it'll be yet.
See ya
Matt
clowo16v
04-04-2006, 17:39
I'm gonna take it on once the bootlid and doors are stripped out and i've drilled the shell. Not sure how light it'll be yet.
See ya
Matt
Remove rear wiper and motor, motor id a good few kg
Also charcoal canister and bracket
clowo16v
04-04-2006, 20:12
Yeh thats whats coming out Lunner then i'm cutting the bootlid frame off. Thinking of removing the horn bracket aswell and tie wrapping them to the inner wing.
See ya
Matt
Clio_GTT
04-04-2006, 20:19
Yeh thats whats coming out Lunner then i'm cutting the bootlid frame off. Thinking of removing the horn bracket aswell and tie wrapping them to the inner wing.
See ya
Matt
The horn bracket is attached to the charcoal canister bracket, just remove them both and the horn should bolt up where the bracket attached to
i assume the charcol canister aint needed for MOT passes?
that will be next to go on mine!
any body got there weights up yet . standard clio . stripped clio. clio with plastic windows. clio with plastic windows and fibreglass bonnet and tailgate.
ash clio gtt
05-04-2006, 00:36
partialy stripped valver with no rear seats or sound deadening, standard front seats, no interior plastics bar dash and front door cards, no roof lining 3/4 tank of fuel and c1j engine 860kg.
now ive removed carpet replaced standard seats with carbon kevlar imolas with alloy sidemounts and removed charcoal cannister, getting it on the weigh bridge thursday with less fuel hoping for 830kg. ill post up how i get on.
few more bits and bobs and ill have mine below 800kg for sure 8)
Clio hybrid, with full custom leather interior, everythign else stock 1030kg
Williams 2, full tank of petrol, spare wheel remove - 1000kg
ash clio gtt
06-04-2006, 17:39
just got mine on the weigh bridge again today with the cobra imolas, charcoal cannister removed, carpet removed, stuff out of glovebox removed, centre console removed and red light on the fuel.
impressive....how much lighter is the 1.4 over the f7r i wonder?
ash mate, can u post a cupla pics of ur car mate? i have no idea what it looks like, and tbh i have no need to know what it looks like but its one of them things that i need to know! good to put a car to the name! :lol:
clowo16v
06-04-2006, 19:55
If its a GTT engine I doubt it'll be much lighter at all once the weight of the extra bits for the turbo are added on. Hoping to get mine <800kg by the end of the year if I can.
See ya
Matt
ash clio gtt
06-04-2006, 20:34
put it this way the c1j engine can be picked up by 2 people prob whereas the valver engine i think not.
http://s68.photobucket.com/albums/i37/ash-cliogtt/?action=view¤t=clio1.jpg
http://s68.photobucket.com/albums/i37/ash-cliogtt/?action=view¤t=clio2.jpg
http://s68.photobucket.com/albums/i37/ash-cliogtt/?action=view¤t=clio3.jpg
http://s68.photobucket.com/albums/i37/ash-cliogtt/?action=view¤t=clio4.jpg
http://s68.photobucket.com/albums/i37/ash-cliogtt/?action=view¤t=clio5.jpg
http://s68.photobucket.com/albums/i37/ash-cliogtt/?action=view¤t=clio6.jpg
engine bay looks a little different now but you get the jist.
and as you can see i have a lot left to strip out to get to martins level, just a fibreglass bonnet will get me under 800kg :twisted:
damn heavy f7r grr lol You still got door cards? :shock:
where the engine mounted? just spotted the engine mount point butchery thats gone on! 8)
ash clio gtt
06-04-2006, 20:42
oooh yesh, door cards got to go as with bits of metal on inside of doors and boot, also fibreglass bonnet, polycarb windows and sunroof still to come :lol:
ash clio gtt
06-04-2006, 20:44
where the engine mounted? just spotted the engine mount point butchery thats gone on! 8)
engine mounts are underneath like the r5/11/21 and its not butchery its pmt (pikey motor tuning) :wink:
yeah, 16v 2.0 is gonna weight one hell of alot more than a 1.4 8 valve regardless of ancillaries!!
martin, time to take the angle grinder to the engine mate, u only need 2 pistons right?! :wink:
can lift my f7p on my own. two people pah
2 people can lift an f7p... is heavy tho as is any engine
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.